0
A simple rectifier circuit uses a diode and there is a turn ON voltage for the diode. The input voltage has to exceed the turn ON voltage (0.6V for ordinary Si diode) before rectification is achieved.
A precision rectifier is an active circuit using an opamp and a diode in the feedback loop. This overcomes the turn-on "knee" voltage.
The op amp reduces the turn-on voltage of a diode in its feedback loop by a factor equal to the open-loop gain of the op amp. For practical op amp gains this reduces the forward voltage to a fraction of a mV, thus giving a "precision" or near ideal diode characteristic for the rectifier function.
What else can I help you with?
What are transfer characteristics of rectifier?
Transfer Characteristic basically is relation between output and input of a electronic circuit. So in case of a series circuit in which a diode and a resistor are in series and the output voltage (Vo) is being measured accross resistor the relation between Input voltage (Vi) and Output voltage (Vo) will be Vo=Vi. When the we will represent it graphically we will get a straight line graph.
What does the out put wave form looks in a rectifier?
A rectifier allows current to flow only in one direction. In a half-wave rectifier circuit, an input wave which oscillates between positive and negative, will 'pass through' the positive portion of the wave, and when the input is negative will output zero. A full-wave rectifier circuit, is commonly configured with 4 rectifier diodes, which allow a positive wave to output when the input wave is negative.
Difference between 4 diodes and 2 diodes rectifier?
a 2 diode rectifier is a center tap rectifier an a 4 diode rectifier will be a bridge rectifier *********************************************************** A two-diode rectifier is not always a centre-tap rectifier. If the two diodes are connected to the same end of a transformer's secondary, one by its anode and one by its cathode, one will proved a positive voltage with respect to trhe other end of the winding and the other will provide a negative voltage. (But perhaps that isn't considered a two-diode rectifier - but a two single-diode ones.)
What is the main difference between a bridge rectifier and a full wave rectifier?
Both the bridge rectifier and the full-wave rectifier achieve the same thing. They rectify the AC input on both opposing phases so as to minimize ripple time and voltage. The difference is that a bridge rectifier consists of four diodes arranged in a bridge, so the input needs to only be single phase AC, while a full wave rectifier consists of two diodes, but needs a split phase AC source, such as provided by a center tapped transformer winding. Also, the bridge rectifier presents two junction drops in the output, because there are always two diodes in series, while the full-wave rectifier presents only one junction drop in the output, because there is only one. It is a trade-off.
What is the difference between a battery charger and a transformer rectifier?
A battery charger is a DC voltage source followed by some kind of regulator that controls the current flowing into the battery. Depending on the type of battery, this regulator might be simple, based on current and/or voltage, or it might be complex, based on voltage slope. A transformer rectifier is simply one of the part of the DC voltage source.
What is the difference between ordinary and extra ordinary?
EXTRA!!
4 What is the difference between a transformer and a rectifier Which are found in a PC power supply?
A rectifier is a device that converts alternating current to direct current. A transformer is a device that changes the ratio fo current to voltage. A rectifier is found in a PC power supply.
What are transfer characteristics of rectifier?
Transfer Characteristic basically is relation between output and input of a electronic circuit. So in case of a series circuit in which a diode and a resistor are in series and the output voltage (Vo) is being measured accross resistor the relation between Input voltage (Vi) and Output voltage (Vo) will be Vo=Vi. When the we will represent it graphically we will get a straight line graph.
What isDifference between primary and secondary statistic data?
Primary data refers to data that is obtained from a first-hand experience. Secondary data, on the other hand, refers to data that has been gathered by others.
What is the difference between an ordinary grant and a tied grant?
The difference between a tied grant and an ordinary grant is that a tied grant has conditions and the ordinary grants don't!
Difference between ordinary prism and constant deviation prismdifference between ordinary prism and constant deviation prismdifference between ordinary prism and constant deviation prismdifference bet?
See this link.What_is_the_difference_between_ordinary_prism_and_constant_deviation_prism
What does the out put wave form looks in a rectifier?
A rectifier allows current to flow only in one direction. In a half-wave rectifier circuit, an input wave which oscillates between positive and negative, will 'pass through' the positive portion of the wave, and when the input is negative will output zero. A full-wave rectifier circuit, is commonly configured with 4 rectifier diodes, which allow a positive wave to output when the input wave is negative.
What is the difference between ordinary prism and constant deviation prism?
difference between ordinary prism and constant deviation prism
What is the difference between a transformer and a rectifier Which are found in a PC power supply?
A transformer is a device that changes the level of an a.c. voltage, while a rectifier is a device that converts alternating current to direct current.
Difference between 4 diodes and 2 diodes rectifier?
a 2 diode rectifier is a center tap rectifier an a 4 diode rectifier will be a bridge rectifier *********************************************************** A two-diode rectifier is not always a centre-tap rectifier. If the two diodes are connected to the same end of a transformer's secondary, one by its anode and one by its cathode, one will proved a positive voltage with respect to trhe other end of the winding and the other will provide a negative voltage. (But perhaps that isn't considered a two-diode rectifier - but a two single-diode ones.)
What is the difference between a one diode rectifier and a two diode rectifier?
A one diode rectifier is called a half wave rectifier and only allows current flow for the positive portion of the sine wave. A two diode rectifier, or full wave rectifier allows positive current flow during the positive portion of the wave as well as positive current flow during the negative portion of the sine wave. This results in a much cleaner DC power signal. The addition of a capacitor in the output circuit will clean up the signal very nicely.
What is the difference between controlled and uncontrolled rectifier?
A simple rectifier is a diode. It only has two terminals and will only allow electron flow in one direction only. A controlled rectifier (SCR=silicon controlled rectifier) has a third connection (gate). Which as the name suggests, is a gate that controls at which point the rectifier will work. It therefore has a level of control.There are various types and you would need the application specification, to get the best use of them.
