P=ie
Simple.. Electrifying ie; electic
Form factor of an alternating current waveform (signal) is the ratio of the RMS (Root Mean Square) value to the Absolute Average Value (also referred to as the Practical Average Value) of the waveform.In the case of a sinusoidal wave ie., an analogue wave, the form factor is approximately 1.11.In the case of a square wave ie., a digital wave, the RMS and the average values are equal; therefore, the form factor is 1.
Consider that current flow "enters" at the emitter and "exits" at the collector and base. Now, IE = IB + IC. Alternately, current "enters" at the collector and the base, and "exits" at the emitter. Now, IE = IB + IC
Emitter current can be summed up by the formula: IE = IC+ IB Where IE = Emitter Current, IC = Collector Current, and IB = Base Current So simply take IE - IC and you'll get an IB of about 100uA. (5mA-4mA = .1mA or 100uA) Also, remember that IB controls IC and IE, not the other way around. You can also determine IB if Beta is known by the formula: IC = IB * Beta Which can be manipulated to equal IB = IC/Beta Hope this was helpful.
Abbr.
Decibel is short dB.
Either "abbr." or "abbrev."
Blvd.
IE= Internet Explorer
sulu an ie
For example.
Ridiculous; implausible
INR
If you mean 'Le bien' it means 'The good'.
Ie in Latin means 'id est' which in English means 'that is' or 'in other words'
Ie stands for, In english, For Example. Eg is a latin meaning, exempli gratia, which does NOT mean the same as Ie."ie" is more properly stated "i. e." and is an abbreviation for "id est", which is Latin for "that is." "e.g." means "for example." "i.e." and "e.g." do not mean the same thing.