0
the operation of connecting an alternator with other alternator or with common bus-bars is known as synchronizing.Generally alternator used in power system where they are connected in parallel with other alternator.
condition for parallel operation of an alternator
1. The terminal voltage of incoming alternator must be same as the bus-bars voltage.
2. The speed of incoming alternator must be such that its frequency f =pn/120 as the same frequency of the bus-bars.
3. The voltage of incoming alternator and the bus-bars voltage are in same phage.
Add your answer:
Earn +20 pts
What is an intermittent operation in which load conditions are regularly recurrent?
Motor, Generator
What does Incoming and running generators are in same phase while paralleling two generators mean?
When two generators are to be run in parallel, one generator is first started and some load is given. Then second generator is brought in parallel with the running generator (subject few conditions, like voltage, frequency, phase angle). First generator which is running is known as running generator, the second generator which gets connected is known as incoming generator
How do you identify a motor and a generator without operation?
a motor drives something a generator is driven by something
What is the function of exciter rotor and stator in Generator Operation?
In the operation of a standard generator, the exciter rotor and stator provide DC-type energy to an AC-type supply. This allows the exciter to maintain a constant DC source.
Parallel operation of transformers?
Transformers can be connected in parallel, if they have the same primary and secondary voltages and equal operating frequency.
What is an intermittent operation in which load conditions are regularly recurrent?
Motor, Generator
What will happen if it does not met the parallel operation of a dc generator?
there will be circulating current between the generators sufficiently large that might damage the machines.
What are the condition for transformer parallel operation?
CONDITIONS REQUIRED FOR TRANSFORMER PARALLEL operation are.. 1. Voltage turn ratio. 2. phase sequence 3. Impedence should be same 4. polarity Hitesh
What does Incoming and running generators are in same phase while paralleling two generators mean?
When two generators are to be run in parallel, one generator is first started and some load is given. Then second generator is brought in parallel with the running generator (subject few conditions, like voltage, frequency, phase angle). First generator which is running is known as running generator, the second generator which gets connected is known as incoming generator
Why you need parallel operation of dc generator?
The generators also have resistance which causes power loss and voltage drops. Connecting them in parallel reduces the total resistance that reducing the voltage drop as well as increasing the total current.
What are the differences of Long shunt vs short shunt generator?
In long shunt the shunt field winding is in parallel to both generator and series field. In short shunt the shunt field is in parallel to generator only.
How do you identify a motor and a generator without operation?
a motor drives something a generator is driven by something
Operation of a d-c generator?
rtreter rtreter
What is a generator breaker?
The generator circuit breaker or gcb is a circuit breaker which is connected with the generator . Whenever there is a fault in the generator the circuit breaker trips and disconnects the generator from operation thus it helps the place from a serious accident etc..
How many generator we can operate in parallel in a system?
In a grid system all the alternators run in parallel, locked together in frequency.
Why is millman's theorem called parallel generator theorem?
Because millman's is used in parallel ckt of impedances and voltage sources
What is isochronous and droop in generator parralel operation?
In generator parallel operation, isochronous refers to a mode where the generators share load equally by maintaining a constant speed regardless of load variations. Droop, on the other hand, is a control method where generators deviate slightly from each other in speed to allow load sharing based on the proportion of setpoints or power output.
