yes, it is possible to change the frequency in substations. frequency changer is a motor-generator set that changes power of an alternating current system from one frequency to one or more different frequencies, with or without a change in the number of phases, or in voltage. Sometimes a converter is used to accomplish this.
These are the substations which can have the capabality to change Frequency which it gets from the generators, human interventions neccessary to accomplish this task.
First we know that transformer is a statical electrical device that transfer electrical energy from one circuit to another circuit with out change its frequency .....it may be voltage or current is change simultaneosuly or separately .... and point is why does not change the frequency in the transformer because the there is no moving part in transformer....As we know that frequency is depends upon the rotation....
the amount of frequency change in the carrier frequency per unit amplitude change in the message signal is the frequency sensitivity this term comes in the frequency moulation
The voltage and frequency ARE the output of the generator. If you change the fuel to the generator, it will change speed, and the voltage will change. Less fuel = less speed = lower frequency = lower voltage.
USE VARIABLE SPEED DRIVE (VSD) OR ALSO CALLED VARIABLE FREQUENCY DRIVE (VFD). THE PRINCIPLE IS TO VARY OR CHANGE THE FREQUENCY WITHOUT AFFECTING THE VOLTAGE. THIS IS ONE SOLUTION TO ENERGY MANAGEMENT AND COMBINED TO BUILDING AUTOMATION SYSTEM OR BUILDING MANAGEMENT SYSTEM.
These are the substations which can have the capabality to change Frequency which it gets from the generators, human interventions neccessary to accomplish this task.
First we know that transformer is a statical electrical device that transfer electrical energy from one circuit to another circuit with out change its frequency .....it may be voltage or current is change simultaneosuly or separately .... and point is why does not change the frequency in the transformer because the there is no moving part in transformer....As we know that frequency is depends upon the rotation....
no it can't be
to provide required current one ckt to another without change in frequency
yes, if you know what you doing. every thing is possible
how do you change the frequency on the remotes for the epson projectors
Yes, it is possible to change the front side bus (FSB) frequency on some computer systems. However, this process often involves accessing the system BIOS/UEFI settings and making adjustments there. Changing the FSB frequency can impact system stability and performance, so it's important to proceed with caution and understand the implications of such adjustments.
the amount of frequency change in the carrier frequency per unit amplitude change in the message signal is the frequency sensitivity this term comes in the frequency moulation
Random change in allele frequency is called genetic drift.
Allele frequency is stable The phenotype frequency does not change.
To change the frequency on a radio controller car, you change the crystal in the transmitter and receiver.
The frequency is the reciprocal of the period. If the period is doubled, the frequency will change by a factor of 1/2.