A: Peak voltage is RMS multiplied by a factor of 1.41
Conversions of RMS voltage, peak voltage and peak-to-peak voltage. That are the used voltages. The expression "average" voltage is used for RMS voltage.Scroll down to related links and seach for "RMS voltage, peak voltage and peak-to-peak voltage".Answer'Average' is not the same as 'root mean square'. As the average value of a sinusoidal voltage is zero, you cannot convert it to a peak-to-peak value.
ANSWER: The peak to peak voltage can be found by multiplying 120 v AC x 2.82= 339.41
P-P voltage = RMS voltage * 2 * sqrt (2)Here's an example: house voltage is 120VRMS, which is actually ~169 volts peak - neutral. double this will give peak to peak value.
When the peak voltage is 311, the RMS voltage is 220. (311 * square root (2))
Peak voltage will be 1.414 times the RMS. Peak to Peak voltage, assuming no DC offset, will be 2 x 1.414 x the RMS value.
No, the peak-to-peak voltage is 2sqrt(2) times as much as the rms for a pure sine-wave.
A: Peak voltage is RMS multiplied by a factor of 1.41
rms stands for root mean squared. rms voltage is a way of measuring a sort of average alterating current voltage as distinguished from peak-to-peak voltage. Likewise for ac rms current.
That is an electric AC or audio output, where the voltage is measured in volts rms. Scroll down to related links and look for "dB conversion (decibel)". Look there in the middle at this headline: "RMS voltage, peak voltage and peak-to-peak voltage".
The average voltage is the rms voltage.Volts peak = volts RMS times 1.414Volts RMS = volts peak times 0.7071Use the link below to an RMS voltage, peak voltage and peak-to-peak voltage calculator.********************************The average voltage is not the r.m.s. voltage.The average voltage of a sine wave is 0.636 x the peak value. Conversely, peak voltage is 1.57 the mean or average.
I am not certain what is being asked here. RMS is Root Mean Square which is basically the DC voltage which would produce the same amount of heat in a heating element as the AC voltage in question. Since AC is continuously changing in polarity and voltage, it is handy to use the RMS voltage rather than the peak (169.7V for 120V RMS) or peak-to-peak (339.4V for 120V RMS). The peak or peak-to-peak voltage is handy to know when considering the maximum values such as in rectification.
Conversions of RMS voltage, peak voltage and peak-to-peak voltage. That are the used voltages. The expression "average" voltage is used for RMS voltage.Scroll down to related links and seach for "RMS voltage, peak voltage and peak-to-peak voltage".Answer'Average' is not the same as 'root mean square'. As the average value of a sinusoidal voltage is zero, you cannot convert it to a peak-to-peak value.
ANSWER: The peak to peak voltage can be found by multiplying 120 v AC x 2.82= 339.41
P-P voltage = RMS voltage * 2 * sqrt (2)Here's an example: house voltage is 120VRMS, which is actually ~169 volts peak - neutral. double this will give peak to peak value.
To calculate the peak voltage of an RMS voltage in a sine wave simply multiply the RMS voltage with the square root of 2 (aprox. 1,414) like this: 240 x 1,414 = 339,4 V RMS x sqr.root of 2 = peak voltage
70.7