The 440 volts listed on the cap is the maximum allowable voltage the capacitor can handle. You could actually use a 370 volt cap on 230 volts. ANSWER; 230 volts AC can it actually be 644 volts peak to peak . It is 44ov because it must be rectified and sees only 324 volt peak which is withing the 440 volt capacitor handling voltage
The only way to do that is with a transformer. They make inline transformers that convert 230 to 115 and they simply plug in inline.
Converting 9 volts to 230 volts would require a pretty hardcore step up transformer (Expensive) and you probably wouldn't have enough current to sustain the load.See discussion page for more information.
Home electrical service in the UK is 230 volts at 50 hertz.
Usually in a 230 volt situation, there are three wires. One wire is called neutral or ground. When you hook a motor or lamp between one wire and neutral, you get 115 volts. They are designated usually as L1, L2 and neutral. Things hooked between L1 and L2 are at 230 volts. Anything between L1 and neutral or L2 and neutral are at 120 volts.
No. Australia's electricity supply is 230 volts at 50Hz... america's is 120 volts at 60Hz.
In a typical electrical system operating at 60 Hz, the voltage provided is 120 volts for residential settings in the United States and 230 volts for most other countries.
the volts are 230
230 Volts
230 volts
230 volts.
Yes, 220 volts is in the same voltage classification as 230 volts.
No. 240 Volts was the nominal standard in Australia with a tolerance of +/- 10%, So the voltage could be anywhere between 216 Volts and 264 Volts. The change to 230 volts is part of international harmonisation between countries that use 220 volt standards and 240 volt Standards. The new tolerance levels are +10% and - 6%.
0.0005
230 volts
That depends on what the suply is if your power suply is 230 then you run it on 230.
It would probably not work on 150 volts. Many televisions can be adjusted to work on 230 v (Europe) or 120 v (USA).