0
Add your answer:
Earn +20 pts
Can a small 12 volt 200 watt electric motor run safely off a deep cycle battery whilst the battery is being charged at say at 20 amperes?
Should be OK. If the motor draw is 200 watts, and the charge current is 20 amps, you've got (12 x 20) = 240 watts in and only 200 out. The battery will charge at a rate of (40/12) about 3.3 amps, so be aware that (i) the battery will take longer to charge than if the motor wasn't running, and (ii) once you stop the motor, the charge current is the whole 20 amps and you'd need to be sure that the battery won't overcharge.
How many kw does it take to make 100 amps?
If the 100 amps is powered by 10 volts, you have 1 kw, or 1000 watts. watts = volts X current The 'k' simply means kilo, or thousand.
How many take amp 40 watt fluorescent lamp?
Watts= voltage times amps. So if you divide Watts by voltage, you will get amps = .33333 or about a 1/3 amp load. This is assuming a 120 volt circuit.
How many kilo volts of transmission line used for transmitting 700 mega watts power?
It depends upon how far you need to take it.
How many amps does a 1.5 hp water pump take to start up?
To answer this question the voltage of the motor must be stated. I = W/E. 1 HP equals 746 watts.
What charger do you need for a 24 volt battery?
The formula you are looking for is I = W/E. Amps = Watts/Volts. 300/24 = 12.5 amps. A good charger with an output of 15 amps will do the job nicely. The time that it will take to charge the battery will depend on the amp/hrs of the connected battery and the state of discharge that the battery is in when charging starts.
How many watts does an iPad charger use?
An iPad charger typically uses 10 to 20 watts, depending on the model and the specific charger. Older iPads usually come with a 10W or 12W charger, while newer models, especially iPad Pro versions, can use chargers up to 20W or more. Apple’s latest USB-C iPad chargers are often rated at 18W or 20W, which allows for faster charging. You can find the exact wattage on the charger itself or in the iPad’s specifications.
How many watts does it take to run a 6 amp trickel charger?
To calculate the watts, you can use the formula Watts = Volts x Amps. If the voltage is typical at 120V for household outlets, then the trickle charger would consume around 720 watts (120V x 6A = 720W) while operating.
How many amps can I charge a 12v battery?
You can safely charge it with a 15 amp charger. You can also charge it with a 1 amp charger it will just take longer. Do not overcharge the battery.
Can you take a car battery charger on a plane?
no
How long does a0.6 amp charger take to charge a 12 volt battery?
A .6 amp charger is a trickle charger. It would take days to charge a dead 12 volt battery with this charger. You need a 10 amp charger which will charge it in a couple of hours.
How do you connect a battery charger to an Oldsmobile Aurora?
take the back seat out othe car and hook up the battery charger to the battery red to pos and black to neg
How long should a 7.2v 1800mah radio control car battery take to charge if the charger outputs 16.5v?
It depends on how many mah your charger can produce
How do you charge your Canon PC1169?
take the battery out and put the battery into the battery charger that came with it and then plug into wall...
Can you charge a 6v battery with a 9v charger?
no, if you charge 9 volt battery with 12 volt battery you will destroy 9 volt battery
How long will a 4 watt solar charger take to put 1 amp into a caravan battery?
A very, very, long time with direct sunlight. Charge your battery with a battery charger
How do you recharge a Game Boy advance SP?
Use a charger and if you do not have a charger take a 12 volt battery and take two uncoded wire twist together and then hook two prongs to the game and to the battery.
