It does not work that way.
I volt is 1 volt
1 volt DC =1.4 voltsAC at a continuous rate of delivering energy.
AnswerUnless otherwise stated, alternating currents are alwaysexpressed as root-mean-square (rms) values. So, 1 A (AC) is an rms value (which is 0.707 times its amplitude or peak value).
By definition, 1 A (AC) will do exactly the same amount of work as 1 A (DC). In other words, 1 A (AC) is exactly equivalent to 1 A (DC)
Since current is proportional to voltage (Ohm's Law), this means that 1 V (AC) is exactly equivalent to 1 V (DC).
DC
You get power by multiplying the amperes and the voltage. 12V, 10A dc would give the same power as 120V, 1A ac.
"Voltage peak" is generally used to denote the maximum(amplitude) of AC voltage supply. It can not be approximated as dc value. The closest approximation one can make for dc value of a ac supply is the RMS(root mean square) value of the voltage. So that the ohmic loss caused by the given AC voltage supply is equivalent to that caused by a dc supply having value equal to the RMS of this AC supply (for given impedance & time).
A DC motor can be built to operate on any voltage.
To convert DC values to AC values if you are wanting RMS values they are the same. 100V DC and 100V AC (RMS) are the same "value". If you want to know the Peak-To-Peak AC value you would multiply the RMS value by 1.414. So 100V AC RMS equals 141.4 V Peak to Peak.
the answer is dc volts are rectified from ac volts and the amperage will be the same unless you account for the slight drop from the rectifier. dc volts from a battery have no relationship to ac volts. you can derive ac volts from a dc source using an inverter.
A: It is a regular DC voltmeter but the AC is rectified and the DC component is measured and displayed as AC VOLTS.
DC
12 volts DC
from the wall it could be 115v ac, or in non American countries that use it 230v ac. internal voltages range from 12v dc, 5v dc, 3.3v dc.
dc - the voltage is a constant 12 volts nominally in a normal car battery.
Depends on use,supply,AC,DC .Voltage,transformer ???
Use a full wave bridge rectifier.
Because alternating current (AC) voltage varies over time, to the positive and negative, an actual AC voltage measurement will not be the same as a DC voltage measurement. For example: 5 volts DC is 5 volts constantly, viewed over time. The average voltage is 5 volts. 5 volts AC (from zero to peak) is not actually 5 volts constantly, but varies between 5 volts and 0 volts over time. The average voltage will not be 5 volts. Using RMS AC values is designed to make AC and DC measurements equivalent, for example 5 volts DC and 5 volts RMS AC are almost identical.
Because alternating current (AC) voltage varies over time, to the positive and negative, an actual AC voltage measurement will not be the same as a DC voltage measurement. For example: 5 volts DC is 5 volts constantly, viewed over time. The average voltage is 5 volts. 5 volts AC (from zero to peak) is not actually 5 volts constantly, but varies between 5 volts and 0 volts over time. The average voltage will not be 5 volts. Using RMS AC values is designed to make AC and DC measurements equivalent, for example 5 volts DC and 5 volts RMS AC are almost identical.
AC 220/240 volts
No, it must be charged with a battery charger plugged into 120 volts AC which converts it to 12 volts DC.