0
It is drawing .06 amps.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How many amps in a small table lamp?
A 120 volt table lamp with a 75 watt bulb will pull 0.625 amps. With a 100 watt bulb it will pull 0.833 amps. And with a modern fluorescent 13 watt bulb it will pull 0.108 amps.
How many amps does a 3000w inverter 240 v draw from a 12 volt system?
It would be at least 250 amps, maybe 300 amps.
How many amps does a 12 volt light draw?
Have to know the wattage or resistance of the lamp to answer this question.
How many amps are in 40 volt amps?
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
How many amps does a can light use?
The answer depends entirely on the wattage of bulb used! You can find the amperage of your light by using the Power Law which states that amperage = wattage divided by voltage. Thus a 60 watt bulb on a 120 volt system would draw .5 or 1/2 an amp.
How many amps does a 5 watt 12 volt bulb draw?
To calculate the amperage, you can use Ohm's Law formula: Amperage (A) = Power (W) / Voltage (V). In this case, for a 5 watt bulb at 12 volts, the amperage drawn would be 0.42 amps (5W / 12V = 0.42A).
How many amps does a led light draw?
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
Do a 12 volt 50 watt bulb and a 230 volt 50 watt bulb draw the same current?
No, they do not draw the same current. The current drawn by an electrical device is determined by the power (Watts) and voltage (Volts) using the formula: Current (amps) = Power (Watts) / Voltage (Volts). So, the 12 volt 50 watt bulb will draw higher current compared to the 230 volt 50 watt bulb.
How many amps in a small table lamp?
A 120 volt table lamp with a 75 watt bulb will pull 0.625 amps. With a 100 watt bulb it will pull 0.833 amps. And with a modern fluorescent 13 watt bulb it will pull 0.108 amps.
How many amps does a 3000w inverter 240 v draw from a 12 volt system?
It would be at least 250 amps, maybe 300 amps.
How many amps would a 15watt radio draw in the transmit mode with 12 volt being supplied to the radio?
1.25 amps
How many amps does a 12 volt light draw?
Have to know the wattage or resistance of the lamp to answer this question.
How you check amp draw on compressor?
Divide the power rating (in watts) by the voltage (in volts). So if you use a 100 watt light bulb in a typical 110 volt lamp then it will draw 100/110 = .91 amps of current. Or plug a 1500 watt electric heater into a 110 volt wall socket and it will draw 1500/110 = 13.6 amps of current.
How many amps are in 40 volt amps?
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
How much amperage does a 12v LED draw?
Not enough to worry about. That's like asking how many amps does the memory preset's on your radio draw. It is in the .001-.01 range.
How many ampere in 240 volt with 100 watts bulb?
To calculate the amperage, you can use the formula: Amperes = Watts / Volts. So for a 100-watt bulb connected to a 240-volt source, the amperage would be 0.42 Amps.
How many amps does a 5000-watt inverter draw from a 24 volt system?
A 5000-watt inverter on a 24 volt system draws approximately 208 amps (5000 watts / 24 volts = 208.33 amps). This calculation assumes 100% efficiency, so actual power draw may be slightly higher.
