How do you connect an ammeter to a circuit?
Ammeter is coneccted in series with circuit but Voltmeter is connected in parallel.
The ammeter does affect the flow of current in a circuit, however, the resistance of the ammeter is so small in comparison to the circuit that the effect is negligible. It is connected in series.
To measure the current in the circuit an ammeter is used and it is connected in series
The positive terminal of the battery would be connected to the positive terminal of the ammeter. The load would then be connected between the two negative terminals, positive side of the load being connected to the negative side of the ammeter.
measures current in a circuit, must be series connected
An ammeter is always connected in series in the circuit.
Ammeter is coneccted in series with circuit but Voltmeter is connected in parallel.
The ammeter does affect the flow of current in a circuit, however, the resistance of the ammeter is so small in comparison to the circuit that the effect is negligible. It is connected in series.
To measure the current in the circuit an ammeter is used and it is connected in series
An ammeter is always connected in series and a vlotmeter in parallel
Because the ammeter connected in parallel will act as a short circuit.
The voltage remains the same across the circuit as it is a parallel connection. So, the current across the upper half of the circuit where the ammeter is connected is calculated as I = V/R = 12.04 (total voltage)/12 (Resistance R1) = 1 A. Hence, the ammeter will read 1 A.
The positive terminal of the battery would be connected to the positive terminal of the ammeter. The load would then be connected between the two negative terminals, positive side of the load being connected to the negative side of the ammeter.
Ammeters are connected in series with the load under test. This requires the load be disconnected from the source, and the ammeter placed in circuit. Voltmeters are connected in parallel with the load under test. This does not require any circuit changes. Sorry, but WikiAnswers does not support illustrations.
measures current in a circuit, must be series connected
ammeter
When measuring a load current, an ammeter is connected in series with the load. The exception is for a clamp on style AC ammeter, which is clamped around one of the conductors, making its measurements as a transformer.