yes wires is electrical panel
It is the same type as the western union splice, where the two wires are overlapping and wound back on the opposite conductor.
A wire splice is the joining of two or more wires together. Commonly this is done with an approved wire joining nut. All slices are to be made in junction boxes to prevent fire should the wire splice become unserviceable.
No, code does not allow that.
The four types of splices and joints are the Western Union splice, tap splice or tap joint, fixture splices or fixture joints, and rattail joint. The most common among the four wire splices is the Western Union splice.
Match the wires by their color codes and splice them together with splice connectors and a crimping tool.
yes wires is electrical panel
Splice uses stranded wires while joint uses solid wire.
It is not recommended to cut and splice antenna wires as it can impact the performance of the antenna. It's better to use connectors or adapters to extend the length of the antenna.
Music travels to headphones through the wires in their cord.
Soldering the wires together
It depends on how many wires are in the cable. The more conductors in the cable set the longer it will take to splice them.
It is the same type as the western union splice, where the two wires are overlapping and wound back on the opposite conductor.
A wire splice is the joining of two or more wires together. Commonly this is done with an approved wire joining nut. All slices are to be made in junction boxes to prevent fire should the wire splice become unserviceable.
Strip the wires back about 3/4" and then using lineman's pliers twist the wires together about 2 turns. Tighten a wire nut securely to the connection. Then tape the splice securely with electrical tape.
I don't see why you couldn't.
One of the wires in your headphones are probably broken. If you wrap your headphones around your Ipod your stretching the wire and it probably disconnected.