0
Add your answer:
Earn +20 pts
Why the waveform of no load current is not sinusoidal?
No load current is mostly inductive, hence the load current may not be a sine wave
What is the effect of inductive load on a single phase full wave bridge rectifier?
rectifier is used to resist the current likewise in bridge wave rectifier ,the inductive load is used to resist high amount of current because in bridge wave we cannot resist the current by using rectifier ..so we are using inductive load here
Fan is inductive load or resistive load?
Inductive since it has a motor with windings.
In a purely resistive ac circuit the current and voltage?
Voltage and current will be in phase for a purely resistive load. As a load becomes more inductive or capacitive, the phase angle between voltage and current will increase.
Which component slow down the current in circuit?
An inductive load can cause current to lag voltage in an AC circuit. An increase in resistance will decrease amount of current flow.
Reactive current through the inductive load produces?
Reactive current through inductive load produces -- Magnetic field
What are the properties of inductive load?
inductive load does not allow the current to become zero eve though the supply source get removed . inductive load reduce the power factor . they does not allow sudden change in current in the load ...
Do air conditioners use resistive load or inductive load?
resistive loadAnswerIf the current is driving a motor, then the load is resistive-inductive.
Why the waveform of no load current is not sinusoidal?
No load current is mostly inductive, hence the load current may not be a sine wave
What is non inductive load?
non- inductive load is without motor and transformer loads are non-inductive load, purely resistive are capacitive loads phase angle is unity are leading PF A non-inductive load is a load whose current does not change instantaneously.
What is non-inductive load?
non- inductive load is without motor and transformer loads are non-inductive load, purely resistive are capacitive loads phase angle is unity are leading PF A non-inductive load is a load whose current does not change instantaneously.
What are the properties of inductance?
inductive load does not allow the current to become zero eve though the supply source get removed . inductive load reduce the power factor . they does not allow sudden change in current in the load ...
What is the effect of inductive load on a single phase full wave bridge rectifier?
rectifier is used to resist the current likewise in bridge wave rectifier ,the inductive load is used to resist high amount of current because in bridge wave we cannot resist the current by using rectifier ..so we are using inductive load here
What is the active power consumed by pure inductive reactance?
The active power of an inductor is zero. As we know, the active power is the result of product of supply voltage and in-phase component of load current. But the load current in pure inductive load lags supply voltage by 90 degrees. So there is no component of load current that is in-phase with the supply voltage. Therefore, the active power in inductive reactance is zero.
Are solenoid valves resistive loads or inductive loads?
Resistive Load An electrical load which is characteristic of not having any significant inrush current. When a resistive load is energised, the current rises instantly to it's steady-state value, without first rising to a higher value. An electrical load in which voltage and current are converted to energy in the form of heat; i.e., an electrical heater, incandescent bulb. Inductive Load An electrical load which pulls a large amount of current (an inrush current) when first energized. After a few cycles or seconds the current "settles down" to the full-load running current. The time required for the curren to "settle down" depends on the frequency or/and the inductance value of the Inductive load
When a series circuit containing resistance and inductive reactance is connected to a ac supply the current will?
The load current will lag the supply voltage by an angle called a 'phase angle', determined by the values of resistance and inductive reactance. The magnitude of the load current will be determined by the impedance of the circuit, which is the vector sum of the resistance and inductive reactance.
How do you use electric power in inductive load?
The actual energy consumed in load is inductive load
