To end (stop) a race car, press the brake pedal.
the car should slow down and eventually stop if you keep on holding it
The pedal on the left is the clutch. You press it when you are changing gears.
You just press gas pedal :))
A car will move when the gas pedal is engaged. You can control the speed of the car by the pressure you put on the gas pedal. The brake pedal will either slow the car down or stop the car entirely.
This is not normal. If your car is doing this, get it checked out.
When You Drive A Old Skool Car With A Carb You press down the pedal for cold starts but when car is warmed up you don't always have to press down the pedal Sometimes you need to press it down in the morning becoause of the condensation. //////on a car with a carburetor you need to press the gas pedal when starting cold to engage the choke and also the fast idle cam
A common example of friction in a car is the friction between the brake pads and the rotors when you press the brake pedal to stop the car. This friction helps convert the car's kinetic energy into heat, slowing down the car.
With the car on, press the accelerator pedal.
if it has a carburetor it is normal
You Should Take It To A Garage
Assuming that the car is a standard, you should first fully push in the clutch and then slowly press down the pedal, or pull up the handle, of your emergency brake (depending on what type you have in your vehicle) until you slow down to a complete stop.