A cutting slope refers to the inclined surface created during the excavation of earth to form a depression or trench, typically along roads or railways. It helps in providing stability to the excavated area and prevents collapses or landslides. The angle of the cutting slope is designed based on factors like soil type, slope height, and engineering standards.
The discharge of a stream is directly affected by the slope of the stream channel. A steeper slope will generally result in a higher discharge due to increased velocity and energy to transport water. Conversely, a gentler slope will result in lower discharge.
Creep slope refers to the gradual movement of soil or rock downslope due to gravity over long periods of time. It is a slow continuous process and typically occurs on a gentle slope. Creep slope can lead to the deformation of structures built on or near the affected slope.
No, contour lines that are spaced close together on a map indicate a steep slope, while contour lines spaced widely apart indicate a gentle slope.
I'm text-based and cannot display images. However, you can easily find pictures of the continental slope by doing an image search on the internet. The continental slope is the steep slope that leads from the continental shelf to the deep ocean floor.
The slope of a line represents the rate of change between two variables. A positive slope indicates a direct relationship, where one variable increases as the other increases. A negative slope indicates an inverse relationship, where one variable decreases as the other increases. The steeper the slope, the greater the rate of change between the variables.
flattening of slope is generally a method of cutting the hill slope in the shape of steps. these steps being horizontal instead of slopey is better to check erosion.
If you mean y = -8 then it has no slope and it is a straight line that is parallel to the x axis cutting through the y axis at -8
There is none because it will be a straight vertical line cutting through the x axis.
When cars want to travel across a steep slope, there is a risk of the car sliding or rolling down the slope. To get a safer, more level surface, machines and explosives are used to dig a notch in the side of the slope. A more general usage of cutting a road refers to the process of smoothing out smaller terrain and vegetation obstacles to transportation, such as when the land is forested and trees are cut down to allow road construction.
The discharge of a stream is directly affected by the slope of the stream channel. A steeper slope will generally result in a higher discharge due to increased velocity and energy to transport water. Conversely, a gentler slope will result in lower discharge.
When farmers plow their fields along the curves of a slope; Cutting down erosion from the top soil is an example of Contour Plowing.
It cuts through the x axis and it is an extension of the line cutting through the y axis which is the y intercept
The line will be parallel to the x axis cutting through the y axis at (0, 4)
i think petrol doesnt save because inlet and exhaust valve operated by cam shaft which is connected to cranck...so during slope both valve work and suction of fuel occurs but ignition doesnt occure,,,,,,
Slope is a noun (a slope) and a verb (to slope).
The slope will be negative.The slope will be negative.The slope will be negative.The slope will be negative.
positive slope negative slope zero slope undefined