answersLogoWhite

0

-- Bring thermometer into room.

-- Wave it around in the air of the room for a minute or two.

-- Do not hold the thermometer in your hand or breathe on it.

-- Wait a while for the room temperature to get through the thermometer glass.

-- Look through the glass at the sliver of liquid inside the thermometer. Find the

end of the liquid, and see what number is marked on the glass at the same level.

That number is your room temperature.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Earth Science

How do you measure temp of room without a thermometer I only have a digital oral thermometer?

You can approximate the room temperature by placing your hand on a surface like a wall or tabletop. If it feels cool to the touch, the room may be below 70°F. If it feels neutral or slightly warm, it may be around 70-75°F. If it feels noticeably warm, it may be above 75°F.


How can you measure a room height using a thermometer?

1) Place thermometer perpendicular to the floor and against the wall. 2) Make a mark on the wall at the top of the thermometer. 3) Shift thermometer up so bottom is at mark. 4) Repeat 2) and 3) until close to the ceiling. 5) Shift thermometer up until it touches ceiling and mark location of highest mark on thermometer to determine fraction of thermometer length for last segment. This would give the height of the room in units of "thermometers". This is not a standard unit of measurement, but it is a measurement. If you desire a more standard unit like centimeters, then measure the length of the thermometer and multiply by height of the room in "thermometers". However, you didn't say whether you had a ruler for measuring the thermometer. As as alternative, you could look up the length of the thermometer in the catalog from which it was purchased.


What do they use the thermometer in daily life?

In daily life, thermometers are commonly used to measure body temperature, check the temperature of food when cooking, monitor room temperature for comfort, and assess weather conditions.


A bulb thermometer gives an indoor temperature reading of 21 degrees celsius A digital thermometer in the same room gives a reading of 20.7 degrees celsius Which device is more precise?

The digital thermometer is more precise because it can measure temperature to one-tenth of a degree (20.7 degrees), while the bulb thermometer can only measure to whole degrees (21 degrees). The difference in precision is due to the digital thermometer's ability to provide more detailed readings.


Why we cannot you use your hand to measure temperature?

You cannot use laboratory thermometer to measure human body temp because of its markings. It is designed to measure large scale temperatures and therefore it may be hard to read the exact bocy temperature.

Related Questions

What tool would you use to measure the room temperature?

You can use a thermometer to measure room temperature accurately. Place the thermometer in the room for a few minutes to ensure an accurate reading.


How do you measure temp of room without a thermometer I only have a digital oral thermometer?

You can approximate the room temperature by placing your hand on a surface like a wall or tabletop. If it feels cool to the touch, the room may be below 70°F. If it feels neutral or slightly warm, it may be around 70-75°F. If it feels noticeably warm, it may be above 75°F.


What instrument measures room temperature?

A thermometer is commonly used to measure room temperature. There are different types of thermometers, such as digital thermometers or mercury thermometers, that can be used to accurately measure the temperature of a room.


What is the use of the wall thermometer?

to measure the temperature of a room


What is the use wall thermometer?

to measure the temperature of a room


What tool is used to measure the current room temperature?

A thermometer is commonly used to measure the current room temperature. This can be either a traditional mercury thermometer, a digital thermometer, or a smart thermostat that displays the temperature on a screen.


What is room thermometer and what it is used for?

A room thermometer is a device used to measure the temperature of a room. It helps to ensure that the room is at a comfortable temperature for occupants, and can also be used to monitor temperature fluctuations for energy efficiency or to maintain specific conditions, such as in a greenhouse or wine cellar.


Can you use room thermometer to measure temperature in the fridge?

Yes, it works in the same manner.


What is a wall thermometer?

A wall thermometer measures the room temperature.


Does the use of a cold thermometer affect temperature reading?

Yes, using a cold thermometer can affect the temperature reading by causing it to start at a lower baseline. It's important to ensure the thermometer is at room temperature before use to get an accurate reading.


What is the difference between thermostat and thermometer?

A thermostat is a device that is used to regulate and control the temperature in a system, such as a heating or cooling system, to maintain a desired temperature. A thermometer, on the other hand, is a device used to measure and display the temperature of a particular environment or object. In essence, a thermostat is used to control temperature, while a thermometer is used to measure temperature.


What temperature is a thermometer calibrated to?

A thermometer is typically calibrated to measure temperatures within a specific range, such as room temperature (around 20-25 degrees Celsius) or body temperature (around 37 degrees Celsius). The calibration point depends on the intended use of the thermometer.