0
Clay has an extremely low permeability (the hydraulic conductivity of clays range from 10-8 to 10-12 m/s) but is not totally impermeable or else it's hydraulic conductivity would be equal to zero.
However in practical applications, clay is often assumed to be impermeable as there are few natural materials with lower hydraulic conductivity values.
Yes, clay has the ability to absorb water due to its porous nature. When clay is exposed to water, it can soak up the liquid, making it an ideal material for pottery and soil that retains moisture for plants.
yes it does. clay soil actually has a problem with absorbing water because it is so thick that it is hard for water to pass through the soil. it is able to hold water inside but very hard to retain it. (lose water)
no because after it has been set it is treated as a solid rock and are forced together very strongly.
Add your answer:
Earn +20 pts
Does silt absorb more water than clay?
Silt has larger particles than clay, so it typically absorbs water more slowly but can hold more water overall. Clay particles are smaller and have a higher surface area, so they absorb water quickly but may not retain as much water as silt in the long run.
Why does clay swell more than sandstone?
Clay has a smaller particle size compared to sandstone, which allows it to absorb and hold more water in between its particles. This water absorption causes the clay to swell more than sandstone when saturated with water. Additionally, clay minerals have a higher affinity for water molecules due to their inherent chemical composition, further contributing to their swelling behavior.
How much porosity does clay hold?
Clay typically has high porosity, ranging from 40-60%. The porosity of clay allows it to absorb and retain water, making it an ideal material for agriculture and pottery.
Does clay has a high porosity?
Yes, clay has high porosity due to its fine particle size and ability to hold water. This allows clay to absorb and retain water, making it a good material for retaining moisture in soil.
Can sand hold the water better than the clay?
No, clay has better water retention capacity than sand. Clay particles are very small and have a large surface area, allowing them to hold onto more water molecules than sand, which has larger particles and less surface area. However, sand does have better drainage properties than clay.
Does clay absorb water and to what extent?
you are dumb
How does modeling clay absorb water?
mix in a tremendous amount of salt into the water. That will greatly increase to boyency of the clay.
Does modelling clay absorb water?
Yes it will. Usually it is a mixture of organic ingredients and anything organic will absorb water.
How well does clay soil hold water?
Water is held between soil particles by capillary forces. Coarse sandy soils have large pores and water drains through it quickly. Clay soils have smaller pores and are able to hold more water.
Does silt absorb more water than clay?
Silt has larger particles than clay, so it typically absorbs water more slowly but can hold more water overall. Clay particles are smaller and have a higher surface area, so they absorb water quickly but may not retain as much water as silt in the long run.
Why does clay swell more than sandstone?
Clay has a smaller particle size compared to sandstone, which allows it to absorb and hold more water in between its particles. This water absorption causes the clay to swell more than sandstone when saturated with water. Additionally, clay minerals have a higher affinity for water molecules due to their inherent chemical composition, further contributing to their swelling behavior.
Can stone absorb the water?
porous stone can, but non-porous stone like clay layers can't
How much porosity does clay hold?
Clay typically has high porosity, ranging from 40-60%. The porosity of clay allows it to absorb and retain water, making it an ideal material for agriculture and pottery.
Does clay has a high porosity?
Yes, clay has high porosity due to its fine particle size and ability to hold water. This allows clay to absorb and retain water, making it a good material for retaining moisture in soil.
Can sand hold the water better than the clay?
No, clay has better water retention capacity than sand. Clay particles are very small and have a large surface area, allowing them to hold onto more water molecules than sand, which has larger particles and less surface area. However, sand does have better drainage properties than clay.
Does soil turn into mud when water is poured into it?
Soil can turn into mud when water is poured into it if there is a high clay content in the soil. Clay particles can absorb water and create a muddy consistency. Sandier soils are less likely to turn into mud when water is added.
What type of soil has highest water holding capacity?
Clay soil has the highest water holding capacity among soil types. This is due to the small particle size and high surface area of clay particles, which can absorb and retain significant amounts of water.
