fire extinguisher safety training Topic: Question Summary: Do I have to take a fire extinguisher class? Question Long-Form: I own a fire extinguisher. Am I required to take fire extinguisher training? If so, where are they offered?
A fire extinguisher does no make dry ice. Dry Ice is the solid form of the gas Carbon Dioxide. At room temperature is you compress (and cool) CO", it turns into solid CO2 (dry ice) without forming a liquid phase.
Carbon dioxide is a liquid in a fire extinguisher because it is kept under high pressure inside the extinguisher. This high pressure compresses the gas molecules together, causing them to condense into a liquid form at room temperature. When the fire extinguisher is activated, the liquid carbon dioxide is released as a gas, which helps smother the fire by displacing oxygen around it.
Not in elemental form. Hydrogen is highly flammable, so putting it in a fire extinguisher would be a very bad idea. Some fire extinguishes contain water, which is a compound of hydrogen and oxygen.
It does not. Technical input: compressed CO2 might be in liquid form INSIDE the fire extinguisher because it is under more than about 5 atmospheres of pressure.
If you remove the siphon tube from a CO2 fire extinguisher, the extinguisher will not work properly. The siphon tube is responsible for drawing and releasing the CO2 gas from the extinguisher. Without it, the CO2 gas will not be able to flow out effectively, rendering the extinguisher ineffective in suppressing fires.
Fire, before you think differently, is a form of matter. Everything is. Fire itself is in the gas state. Some people think it is a solid, but in fact it does not have the substances that make it solid (or liquid for that matter).
No, fire is not solid. Fire is a process of rapid oxidation that produces heat, light, and flame. It exists in the form of plasma, which is a state of matter where electrons are stripped from atoms.
No, fire is not a solid. Fire is a chemical reaction involving heat, fuel, and oxygen that produces light and heat energy.
Any solid whose melting point is lower than that of the fire. The question is ambiguous because the temperature of the fire it not stated. The sun is form of a fire but its surface temperature is several million Kelvins, nothing including steel is solid at that temperature. A candle light is around 900 degrees steel is solid at this temperature.
First priority is to remove the source of the electricity. Without that, the fire will continue to form. After disconnecting the electrical source, put out the fire as normal, with a co2 extinguisher and foam. Sand works too.Improvement:Sand is the best option after a CO2 extinguisher. Improvement:I agree but you could also try smothering it with a fire blanket (if you don't have a CO2 extinguisher lying around!) to take away the oxygen BUT NEVER put water on an electrical fire it just makes it worse.IMPROVEMENT;here are some good tips,NEVER USE WATERif it is small you could use some baking sodaan ABC or class C fire extinguisher are best
The three forms of fuel needed for a fire to start are fuel in the form of a solid (such as wood or paper), fuel in the form of a liquid (such as petrol or oil), and fuel in the form of a gas (such as natural gas or propane).