Samcjones
No. The diaphragm on the pressure gauge is leaking, and the gauge will soon be inoperative. Have the extinguisher serviced and repaired.
Wiki User
∙ 14y agoYes, an automotive fire extinguisher needs to be recharged whenever you have used it or whenever the pressure gauge falls outside of the green range.
Many pressurized water fire extinguishers are charged with air at 100 psi.
You would not want to use a pressure water extinguisher on any electrical fire due to the possibility of electricity being conducted through the water and injuring someone. A CO2, dry chemical or "clean agent" (e.g., "Halogenated") extinguisher would be a better choice for an electrical fire, knowing that dry chemical powder will make quite a mess.
Trick question, if the fire extinguisher is full of water, such as a Class 2A. However, a fire extinguisher is designed to put out a small fire quicker than anyone can respond with a hose and a water supply. Unfortunately, many fires react violently when water is applied to them, so a different type of fire extinguisher must be used.
When it comes to fire extinguishes, the smaller the volume of the extinguisher the more pressure the gas has. So if the size of the fire extinguisher is small, the pressure might be high.
A water fire extinguisher with an anti-freeze charge added to it.
use an ABC fire extinguisher NOT WATER
Get a fire extinguisher! Or get LOTS of water!
CO2 extinguisher have a max test pressure of 20,700 kPa. Max design operating pressure of 18,570 kPa. The min burst pressure of a cylinder must be at least 2.7 times the max operating pressure. So the burst pressure of a CO2 fire extinguisher will be at least 50,139 kPa
The gas used in fire extinguishers is carbon dioxide. That is only for a CO2 extinguishers High pressure and no Gauge on the unit(about 2000psi). Normal Dry chemical extinguisher ABC, BC (195psi)Use Nitrogen as the propellent.
Water bucket.
NO!!!!! Use a Dry Chemical extinguisher