Not really. What is he installing? What are you trying to say? A plumber can install showers and faucets. He can install a faucet in a shower. He can install any plumbing fixture. Also it should be is this sentence written correctly.
Depends on the situation, I would charge 1-2 hours for that, but other equipment can complicate the job. If there are garburators and water filters they often have to be removed and replaced.
How to Install a Kitchen FaucetWhether replacing a broken fixture or as part of a remodel, follow these steps to install your new kitchen faucet.The first step is to choose the faucet that matches your kitchen decor. Always read the manufacturer's instruction concerning how to make the necessary connections. Ensure that you have all the required parts and tools on hand. The faucet should come with a rubber gasket to seal the space between the countertop and the faucet. If not, use plumbers' putty. Place the faucet in its proper location. Secure the faucet in place with the large plastic nuts using a plumber's basin wrench. Do not over tighten plastic nuts.Now use the appropriate length flexible supply line that has a braided steel covering to connect the water supply lines to the faucet. Make the connection to the water line first. Flush the line so sediment and debris don't reach the faucet. The flexible line has a larger connection on one end that attaches to the faucet. The smaller, 3/8th in. fitting connects to the water supply line.The next step is to connect the sprayer. Use the supplied gasket or putty to create the seal between the decorative ring and the countertop. Secure the ring in place with the washer and plastic nut. Slide the sprayer through the ring and connect it to the faucet. Test your new faucet. Use a bucket to catch the water if a drain line is not installed.
if you dont know this you should not be a plumber
As far as I know, all kitchen sinks have the faucet in the middle. There are usually 4 holes, 3 for the faucet and one for the hand sprayer. Some have a fifth hole for a soap dispenser.
About one hour unless it is a really unusual situation
$350
You should install kitchen cabinets in the kitchen most likely. If they are floor cabinets you should install them against a wall on the floor under a sink or counter. If they are wall cabinets you should put them on the wall. If they are corner cabinets you should put them in the corners.
If you're not the greatest handyman, then yes you should probably call a plumber. For most problems with faucets though, it's an easy fix. It really depends on the situation.
I just installed an American Standard kitchen faucet and it continues to run for a second or two after turning the handle. I called AS and they said it is because of the high arch and the location of the stop valve lower in the fixture. I think it may have more to do with this being a lower end kitchen faucet. During a bathroom remodel we installed a high arch Pegasus bathroom faucet and, while it is admittedly not at high as the kitchen faucet, it stop immediately and doesn't continue to run/drop at all. When I removed the Pegasus faucet filter at the spout, it behaves just like the kitchen faucet, so there's some sort of stop valve element at the spout of the Pegasus that isn't part of the AS faucet.
You could visit a hardware store and ask about your options depending on your faucet. If you want to try a different faucet, ask if it would be easy to install it even if its different
You can call a handyman or a plummer in your area to help install your kitchen taps. It should not cost more than $50.00 to do this.