A gas grill might not light due to the cabling not being functional.
You Either Ran out of gas, or your igniter has gone bad. if neither of these is the problem clean your burner, it maybe some cob webs got in there and restricting the flow of gas.
You could have a leak in the gas line or it could be clogged. Also, you could be out of fuel, when was the last time you filled your tank? One of those should be culprit.
The spark provides enough energy to break the bonds of reacting molecules and get the reaction started.
The spark from the igniter provides the initial activation energy needed to start the combustion reaction of propane. This spark ignites the propane gas, which then reacts with oxygen in the air to produce heat and light. The spark is crucial in initiating the chemical reaction that allows propane to burn and generate the necessary heat for cooking on a gas grill.
no you need power to run the board and the igniter
If you like to cook outdoors on the grill often then consider using a gas grill. Gas grills are more convenient to use than charcoal grills. Simply turn on the burner and hit the igniter and you are ready to go. Clean your grill by warming it up first for easier removal. Propane tanks are inexpensive to refill and there are always several locations of nearby dealers. Be sure that the gas lines are tightly secured to prevent any leaks. Store your tanks in a location out of direct sunlight.
The cold plays havoc with your igniter. try lighting it with a long lighter or peice of paper. Be sure your gas is off when you light the lighter, when lighter is lit you can then turn on the gas, keep your face, clothing, and hair away from the burner.
why take about 1min & 30sec to get burn between igniter & gas work, burn about 30sec then going off another 1min & 30sec cooling down
The steps involved depend of the type of grill you have. If you have a gas grill it can be as simple as turning on the gas. A charcoal grill can be complicated invoving starting kindlingk, lighting the charcoal, soaking wood chips, letting the grill get to temp and so forth.
You ask your boyfriend or husband!
Igniter plug is used in gas turbine engines for ignition,and may be turned off after once the ignition started in combustion chamber.