If it's only in the hot water then you need to clean the sludge out of your tank at least. You may need a new tank. - To clean, close the cold incoming valve, switch off the power to tank, attach a hose on the bottom running outside or to nearby drain,then open the faucet on bottom , open the spring loaded valve on top to help flow. Let it all out, then open the water valve on cold pipe and let that flush out the tank for 5-10 minutes.
One possible solution is that the expansion tank is installed on the hot water outlet line. It should be on the cold inlet side because the hot water over time breaks down the bladder within the tank. As the bladder "dissolves" it leaves black specks in the hot water which clings to bathroom/kitchen tubs, sinks, etc. that smear like eyeliner or grease.
One possible solution is that the expansion tank is installed on the hot water outlet line. It should be on the cold inlet side because the hot water over time breaks down the bladder within the tank. As the bladder "dissolves" it leaves black specks in the hot water which clings to bathroom/kitchen tubs, sinks, etc. that smear like eyeliner or grease. Another possibility is to check the hot water lines connecting your pipes to the hot water heater. The inner liner of reinforced flexible rubber supply lines will deteriorate over time. As the inner liner degrades it leaves small graphite like black flakes that will come out through fixtures as hot water is run.
hot and soapy water.
hot water is to get lots of stuff clean.
Yes. It is safe to clean an infected toe with hot salt water.
HOT water and cloth brush. dry well before oiling.
Because if hot water goes down your throat you get a stomach ache
with hot water
Yes it would cause it has water in it
yes,hot water kills bacteria
The easiest way to clean a nonporous surface of black mold is to scrub it off with a solution of 1 cup of borax to 1 gallon of water.
It is always important to keep things clean with hot water and soap.