Wiki User
∙ 13y agoWe don't have TV codes for the Soyo TV yet but I have provided instructions on how to perform a power scan with the DISH remote to locate a code that could possibly work your Soyo TV.
Remote: Basic Remote (Television Only)
Wiki User
∙ 13y agoCode 759 worked for me. Try that :)
Press TV button until it stays on. Enter the Code : 720 Press # You should be ready
I have provided instructions on how to program your remote to your TV. You did not indicate the model remote or receiver you have. We don't have a code for your brand of TV but you can perform a power scan for a code in the remote.Address To Other Equipment Using Power ScanRemote: All Remotes (except Basic) With the TV on, press and hold the clear TV button until all mode button back lights illuminate, then release.Press and release the Power button.Press the Up button once a second while pointing the remote at the TV. Note: If the code for the equipment comes up, the TV will power off.Press the POUND (#) button. Note: If the code entered is valid for the remote, the mode light flashes three times.Try the remote to see if you can turn the TV back on. Try to volume to see if the remote controls the TV volume.
remote code for arc-u1 remote on lg tv
remote code for tv/dvd kenmark
The remote code number of my 22" magnum Tv is 38
what is the direct remote code for a favi tv
To control your TV with your Dish Satellite remote, you need to perform a power scan to find your remote code. With your Dish Network remote, follow these steps: 1) Turn on your TV 2) Hold down the 'TV' button at the top of your dish satellite remote (the one that lights up) until all 4 buttons at the top light up 3) Press the large red power button on your Dish remote 4) Press the channel up (on most remotes above the select button in middle) slowly until the TV shuts off 5) Once your Television powers off, press the pound key '#' (at the bottom of your Dish satellite TV remote)
The universal remote code differs for each individual television.
Depending on what model TV you have, it could be one of these for Dish Satellite TV: 505, 526, 546, 566, 654, 730, 747, 573.
To program your DISH Network remote to your Orion TV you will simply- press and hold the TV Mode button on your DISH Network remote, until all the other mode button back lights illuminate, then release. -Now while the TV mode button is blinking enter in the remote code; 720 which is the remote code for your Orion TV. After entering 720, then press the pound (#) key. -After pressing the # key on the DISH Network remote, the TV mode button should blink 3 times and then turn off completely. This will mean the programming of the DISH remote to your TV has been completed successfully. While still in TV mode try any of the functions on the remote, such as turning the volume up or down on your TV or attempting to press the power button. -The DISH Network remote should now be programmed to control your TV. -If the remote code 720 doesn't program the DISH Network remote successfully you can also try the following using the same procedures, 220, 748, 721, or 062.
The 4-digit lock code for the Mitsubishi television Model # VS-50603 will depend on what remote a person is using with the television. If the television is going to be used with a satellite television remote, contact the television service provider. If using the Mitsubishi television remote, try 9999. A person can also turn the television on, hold down the TV button on a remote and keep hitting the on/off power button until the television turns off.