0
Turn the TV and the DTV receiver on and be sure you have good batteries in the remote.
Using the Select button and the arrow keys around it on the DTV remote:
Menu Button>Parental, Fav's and Setup>System Setup or Setup>Remote>Program Remote>(there may be 1 or 2 more screens here depending on the DTV receiver model, just continue through them)>On the Devices screen select "TV">Select your television's manufacturer>STOP on the screen with the codes across the top.
1. Push the Mode switch on the remote all the way to the right to "TV". Ignore the on-screen display that says "TV Keys Aren't Programmed."
2. Push and hold the Mute Button and while holding it also push and hold the Select button until the green light above the Mode switch blinks once and then blinks twice in a row.
3. Enter the first 5-digit number you see on the screen into the remote's keypad. The green light will blink twice again.
4. Aim the remote at the TV and use the volume paddle. If the volume works, just push the Mode switch back to the left and your done. If it doesn't, repeat steps 2-4 for each successive number.
5. Write down the correct number. Be sure to push the Mode switch back to DTV before doing anything else.
What else can I help you with?
How do you program Direct TV receiver model HR22-100 to Toshiba remote control ct-90275?
You cannot program a Direct TV receiver with this remote. The Toshiba TV this was designed for was introduced before the Direct TV HD systems came out. This remote does not control any model of DVR. If you want to control both of these with one remote, get a Logitech Harmony remote.
How do you program direct TV remote to upstar TV?
My television model number is not listed on direct tv. How do I program the remote to control my television
How do you program bulldog remote Do not know what model it is.?
No
What is the directv remote code for a FAVI model tv?
what is the direct remote code for a favi tv
How do you program your hct tv to a universal remote?
i have hct tv model HPP_42HCB i need the code for the remote Directv remote rc65rx
How can I program a Chamberlain remote?
To program a Chamberlain remote, you typically need to locate the "Learn" button on the garage door opener unit, press it, and then press the button on the remote you want to program. This will sync the remote with the opener. Refer to the specific instructions provided by Chamberlain for your model for detailed steps.
How do you manually program a Philips Universal cl015 remote without the code?
Your remote's model is actually PMDVD6. You should be able to get the manual for this remote from Philips' website.
How do you program a sharp aquos remote to control a model sony bdp-bx59 Blu-ray player?
How do you program sharp squid remote to control sony s570 blu ray system
Need remote code rcr660 DirecTV?
Need to be more specific with your tv model or receiver model depends what you want to program.
What if you do not know the model number of your RCA universal remote?
Well you cannot get arrested for not knowing it nor is the lack harmful.
How do you program a automate keyless entry remote?
It will depend on the make and model of the car. They do this so one can make a copy of the automated keyless entry remote.
How to you program codes in GPT universal remote control RM-788?
To program codes in a GPT universal remote control, RM-788, first you need to know the make and model of your television set. Then you find that code number on the pamphlet that came with the remote and enter it on the remote.
