open the bundy clock, click pro, make sure it is in P1, then press in on the left, then adjust the date, year/month/day, press enter, press again the out button on the left, then adjust the time, clock format ( 12 or 24 hr format, then actual time, hour/min. then press enter, close the bundy clock. finish!
Your manual is the best place to look to set up the clock. If you cannot find your manual visit the Bundy clock website for assistance.
First, adjust the hours. Then, adjust the minutes
== ==
Turn off the radio and press the clock button. Use the adj dial to adjust the hour, press the clock button again to adjust minutes.
Some of them (newer ones) have a setting in its menu called "Clock Adjust"... Older ones, pressing the clock button for 5 seconds, then starts to flash the time, and you adjust it.
You consult the Owners Manual
Hold the volume knob in. The clock will flash. Adjust the clock with the tuning knob while holding the volume knob in.
You have to gently lever out the clock (use a spoon) and the adjustment is on the reverse
You can set or adjust the clock on a Peugeot Boxer van by pushing on the little buttons below the clock using a pen point.
Simply hold the HR button in and the hours SHOULD change - same with the MIN button. If this doesn't work the clock is faulty.
To adjust the time on the dashboard clock of an Iveco van, you typically need to locate the clock adjustment button on the dashboard. Press and hold this button until the time display starts blinking. Use the same button to adjust the hours and minutes accordingly. Once you have set the correct time, release the button to save the changes.
Hit clock symbol button then adjust using the right tuning knob. Thanks, Wes