The bluetooth adapter has to have a slot to go into the printer, and the bluetooth must be set up properly in the computer sending the information to the printer. Sometimes, though, it may work on and off, meaning it may work fine one time, but just not work another time someone tries it. The bluetooth adapters aren't that reliable, and a cable connecting directly to the printer would be better. The bluetooth must be configured properly with the computer, and a printer driver must be on the computer.
The answer to your question actually depends on whether or not your wireless printer is Bluetooth-enabled or Bluetooth-compatible. If it is Bluetooth-enabled, you should have no problem setting up a connection between your two devices. If it is Bluetooth-compatible, you will need to purchase the applicable adapter or dongle for it before you can set up a connection. If it is neither Bluetooth-enabled nor Bluetooth-compatible, your Samsung Galaxy S will not work with it.
There is Velcro in the package with the BlueTooth adapter that you can use for this.
No! It does not have an inbuilt bluetooth.
Yes, although if someone is not talking to you, the adapter will end the call after a while.
No, it is not necessary to use a bluetooth adapter all of the time. This is only a temporary tool for bluetooth. If you are unsure, you could always ask your local bluetooth provider.
Unless the printer can be connected via airport which is doubtful you cannot. You can however connect it via WiFi or by Bluetooth if you printer is Bluetooth ready or with a Bluetooth device if it is Bluetooth compatible. Your Mac is Bluetooth ready.
A modern Mac will have Bluetooth built in so an adapter is not required.
Using Bluetooth USB adapter, they are very cheep, as low as £1,
Does emachines E627 have an in built Bluetooth card?
No, this printer does not have either bluetooth or wireless capabilities.
one
If you do not have one, you can purchase usb bluetooth adapter.