If your laptopscreen does not show anything - not even a manufacturers/microsoft logo during start-up, it is likely your screen is broken.
If your laptopscreen shows a very faint picture, it is likely the backlight of your laptop screen is broken / disconnected.
If however, everything is normal, up to when you would normally see your login screen, but then your screen goes black, it is likely to be a setting on your computer, which you yourself can fix.
it will need to be charged.And then again it might not have to be changed.Have you tried booting in safe mode? It could be as simple as the computer getting hung on start up.
No. The computer would still boot, and you may also hear the fan running. If the screen flickers, is blank, or dim, then you may be suffering from a bad inverter board.
the keyboard connector is not seated properly
I usually just press the power button - that usually does the job of booting up my laptop !
press f12 in the start up screen and that will access the boot menu. in the boot menu arrow key down and select your CD drive. enter and your booting to the CD. hope this helps.
Take a closer look at the LCD screen. Can you see a very dim image on the screen? If you can, most likely there is a problem with the inverter board. The inverter board is a power supply for the LCD screen and when it goes bad the screen looses backlight. The inverter board is located inside the laptop display. In order to replace it you'll have to open up the display panel.
its called a "boot-up"
When booting up the computer push F8 or delete and the put it in safe mode, it should work then!! =) When booting up the computer push F8 or delete and the put it in safe mode, it should work then!! =)
no it dos not
put it on fire
this can be done by booting into the bios when the device is first loading up (not the operating system loading screen)
That's what mine does, I have researched it & i think that it is because the screen has broken.