Hubs are dumb devices that operate at the hardware layer of the network only. They basically function like an old party line phone system where everything that gets transmitted is sent to every port on the hub and all the connected devices ignore transmissions not sent to them. Hubs are simply not sophisticated enough to offer services and protocols such as DHCP, DNS or any other network protocols themselves. Devices that do offer DHCP are typically routers, some layer 3 switches or servers.
DHCP should only be enabled if your network is set up for dynamic IP addressing.
You can use either a network hub or a network switch to set up your network
How to setup shava tv plus ip dhcp
By implementing DHCP, you would eliminate the need to set-up IP addresses manually. DHCP (Dynamic Host Configuration Protocol) simplifies the management of IP address configuration by automating address configuration for network clients.
DHCP s just a server that provides IP details to a computer. Since it can be set up to give statc IP address details to specific computers it has no disadvantage....unless of course the DHCP server crashes.
Yes, it is easier than setting up a DHCP server.Yes, it is easier than setting up a DHCP server.Yes, it is easier than setting up a DHCP server.Yes, it is easier than setting up a DHCP server.
If your BT home hub is new, you should have received complete instructions on how to set it up when you purchased your hub. If not, it is a fairly simple process, and there is a wide variety of information online that will give you step by step instructions for your particular model.
Look up active directory. But you'll need to know how to set-up, implement and fully understand DNS first. You cant have an active directory without successfully setting up dns on the server beforehand. And look into DHCP too, it will make life alot easier.
Just configure a DHCP server using router settings and you are good to go.
You cant
You cant duhhh
DHCP