0
What occurs when computers are configured to receive their network configurations dynamically?
Add your answer:
Earn +20 pts
Which computers would be found in a DMZ?
the server that contains the network firewalls configurations
What is dynamic protocol in networking?
I think your question is 'What is Dynamic Host Configuration Protocol' ? If that is so then here's the answer Dynamic Host Configuration Protocol' or DHCP is a Protocol defined in the TCP/IP protocol suite to dynamically configure the Hosts (computers ) in a network. Configurations such as IP address , sub net mask and all other parameters are configured automatically with the help of DHCP server?(which uses the DHCP protocol.
A technician installed a network adapter in a computer and wants to test the network connectivity the ping command can only receive a response from local workstations what could be the problem?
If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.
Server computers and other systems that need to be accessed reliably by network clients should be configured with an what?
NAP
What describes a public network?
Computers that are connected to each other create a network. These networks are often configured with "public" internet Protocol (IP) addresses -- that is, the devices on the network are "visible" to devices outside the network (from the Internet or another network). Networks can also be configured as "private" -- meaning that devices outside the network cannot "see" or communicate directly to them.
What best describes a public network?
Computers that are connected to each other create a network. These networks are often configured with "public" Internet Protocol (IP) addresses -- that is, the devices on the network are "visible" to devices outside the network (from the Internet or another network). Networks can also be configured as "private" -- meaning that devices outside the network cannot "see" or communicate directly to them.
A network that has ten or more nodes is usually configured as a?
A network that has ten or more nodes is usually configured as a client/server network.
Can other computers see my security network info?
Not if your firewall is configured correctly. Routers and software firewalls block any unauthorized attempts to get at this sort of information.
How do you make a computer to computer network?
The basic components of a network are the clients and the network hardware such as the switch that connects the hosts together. Each client is required to have a network interface card and must be configured with the network IP settings that the admin has configured for the network. Once all the lower level settings have been configured you need to configure the computer to join either the workgroup or the network domain that is configured on the network.
How do you use the static IP addressing and dynamic IP addressing?
by using DHCL protocol we can gets that network is to do dynamically but if we when to do that statically we could do that gets all computers gives Ip address
When configured correctly can network firewalls can help protect your network?
Yes, they can.
What path will be used to transmit the data?
All routers are properly configured with default configurations and are running the OSPF routing protocols. The network is fully converged. A host on the 192.168.3.0/24 network is communicating with a host on the 192.168.2.0/24 network.Answer . The data will be transmitted via R3-R1-R2
