Any signal would have four states high indicated by 1, low indicated by 0, high impedance indicated by Z and unknown indicated by X. An unknown signal often occurs when you have not connected the pin to anything or you are trying to take output from the pin while it is not really giving the proper output
The Socket 4 Pentium processor from the early 1990's had 273 pins the socket 5 had 320.
Depending on how much you use the computer and how you treat the computer the processor can last anywhere between 1 and 7 years.
Use two five pin relays 1 for low beam and 1 for high
STAGE PIN 1, TWISTLOCK 2, EDISON 3
10/3= /9
Simple case: First pin to the LEFT of a dot and/or a notch is pin 1. Chip with > 1 dot: The darker/deeper dot is the main dot, first pin to the left is pin 1. No dot or notch, just a semi circle on 1 side: First pin on the left is pin 1.
Pin 1 is +5V, pin 2 is Ground and pin 3 is the signal. Use analog voltimeter in pin 2 and 3. Crank the engine: the pointer of the voltimeter shoud oscilate in range 0V to 5V.
Pin 1 is for ground, Pin 2 is for positive audio signal, and Pin 3 is for negative audio signal.
First Answer:The head pin (No. 1 pin)Second Answer:The kingpin in bowling is the five pin. It is called the kingpin because the five pin is important in the pin action of the other pins to be successful in striking. The no 1 pin is the head pin. See my support in the links section below.
aray processor is a processor that performs computations on large arrays of data. It is of two types: (1) attached array processor. (2)SIMD array processor.
1. Intel 2. AMD