Depending on the type, a computer can be considered an electromechanical device. This is because some parts feature mechanical operation (e.g. floppy disk drives and optical drives) while others are purely electronic.
The last famous electromechanical computer was:
in the year 1936 konrad zuse invented the z1 computer. it was the first freely programmable computer, but it was electromechanical not electronic
Z3, an electromechanical programmable computer was invented in Berlin. ENIAC, the first general-purpose electronic computer was invented at the University of Pennsylvania.
Because the definitions of the word 'computer' vary, it is hard for historians to concur on when and where the computer invented. Charles Babbage's Analytical Engine, the first electromechanical computer, was created in 1837 in England.
No. the first anlalytical engine was babage computing machine it was controlled by steam it was not electromachenical
Mechanical ones were built as far back as 100BC. The Bush Differential Analyzer was a large programmable electromechanical analog computer built starting in 1929. The famous Norden Bombsight of WW2 was an electromechanical analog computer designed in the 1930s and built through much of the 1950s, when electronic analog computer bombsights replaced it. Electronic ones were built from the 1930s through the 1970s.
He named it the Mark I. Later he made Mark II&III. (:
A PLC is programmable logic controller (PLC) or programmable controller is a digital computer used for automation of electromechanical processes.
Izhevsk Electromechanical Plant was created in 1957.
The Harvard Mark I was commisioned by the US Navy and built by IBM and represents the first electromechincal computer capable of executing a complex list of instructions.
A computer is a programmable machinedesigned to sequentially and automatically carry out a sequence of arithmetic or logical operations. The particular sequence of operations can be changed readily, allowing the computer to solve more than one kind of problem. An important class of computer operations on some computing platforms is the accepting of input from human operators and the output of results formatted for human consumption. The interface between the computer and the human operator is known as theuser interface.A computer is electrical, electronic and electromechanical. The power supply is an electrical component which is as much a part of the computer as any other part.The cd drive of a computer is an electromechanical piece of hardware. There are others, this is one example. The motherboard, cards, buses, processors are electronic parts.
A variety of methods were employed, from electromechanical telephone relays (Zuse KG Z3) to thermionic valves (ABC, Colossus, etc).