0
What is the different between recessed mounted surface mounted?
Wiki User
∙ 12y ago
Recessed mounted is inside a box with 1 side open, have louver then mounted inside the ceiling facing the opening downward. While surface mounted is directly screwed on the ceiling.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the term for a hole that allows a socket head cap screw to be mounted below the surface that it is threaded into?
That is a recessed screw mount.
What main factors influence the choice of eletrical boxes?
The location is will be mounted. Whether is be recessed, or surface mounted. If you plan on ganging boxes or not for multiple switches or receptacles. The amount of wires that will be entering/exiting the box.
What are recessed areas on the surface of an optical disc?
PITS
What do call the Recessed area on the surface of a CD?
pit
What is the part of an engine the oil filter is mounted to?
Normally it is mounted on the engine block. The surface is called the oil filter mounting surface.
What dose smd stand for?
Surface Mounted Device
Fluorescent fixtures mounted on low-density cellulose fiberboard must generally be mounted the fiberboard surface?
The 2008 National Electrical Code (NFPA 70) Article 410.136 (B) requires surface mounted luminaires containing a ballast to be listed for mounting on the fiberboard or they must be mounted not less that 1 1/2 inches from the surface of the fiberboard.
What is the difference between pitless and pit type weighbridges?
Pitless weighbridges have the weighing surface at ground level, making them easier to install and maintain compared to pit type weighbridges which require a pit to be dug for the weighing surface. Pit type weighbridges are usually more expensive but provide better protection from environmental factors.
A collection of bits of paper or photos which are mounted to a surface?
collage
Peugeot 307 hdi abs fault have changed all sensors what else can it be?
Having same problem with mine, I have read that this is caused by rust on the surface that the rear abs sensors are mounted to. This apparently increases the distance between the sensor and the part on the wheel that the sensor monitors. Advised fix is to clean rust from surface, if this does not work the addition of a thin washer between sensor and the surface it is mounted on may be required to restore the appropriate gap. Will be trying this this weekend. Good luck.
What is recessed cooktop?
A recessed cooktop is a cooking appliance that is installed into a countertop or cabinet in a way that it sits below the countertop surface. This design creates a seamless and streamlined look in the kitchen. It helps to save space and makes cleaning easier since there are no edges or crevices for spills to accumulate.
What does smd stand for?
SMD stands for "Suck My D--k"SMD: Surface Mount Device
