0
Add your answer:
Earn +20 pts
What three components are installed when you add the Fax server role?
Fax Server role, the fax printer, and the Fax Service Manager.
What roles must be installed with the fax server role on windows server 2008 computer?
ou can use a fax server to configure fax devices to enable the users in your network to send and receive faxes. To create a fax server and install Fax Service Manager, the fax printer, and the Fax service, you must install the Fax Server role on a computer running on a computer running Windows Server 2008 or Windows Server 2008 R2. The Fax Server role is available from Server Manager.Once you have created a fax server, you can use Fax Service Manager to do the following:Configure fax devices.Manage users.Set up routing policies for incoming faxes.Set up rules for outbound faxes to specific device groups.Set up archiving of faxes that have been previously sent or received.Configure logging to track the use of fax resources.Configure delivery receipts.Stop or start the Fax service and block the Fax service from accepting any outbound or inbound faxes.Fax users can then send, receive, and manage their faxes by using a fax device managed by the fax server.Fax componentsKey fax-related components include: Fax Server role. To create a fax server, you must install the Fax Server role from Server Manager. This installs Fax Service Manager, Windows Fax and Scan, the Fax printer, and the Fax service. For instructions, see Install the Fax Server Role. Once you install the Fax Server role, you can access a role page in Server Manager that provides a single point from which you can view fax events, view status information for the Fax service, and access resources and additional information for fax servers. To access this page, in Server Manager, click Roles, and then click Fax Server. The role page appears in the right pane.Fax service. After you install the Fax Server role, the Fax service appears in the Services snap-in and you can start or stop the service directly from there or from the Fax Server role page in Server Manager.Fax Service Manager. Fax Service Manager, a Microsoft Management Console (MMC) snap-in, provides a central administration point for configuring and managing your fax resources. Once you install the Fax Server role, you can access Fax Service Manager from Server Manager by clicking Roles, clicking Fax Server, and then clicking Fax. You can also access this tool by adding it to an MMC console.Windows Fax and Scan. After you install the Fax Server role, you can access Windows Fax and Scan by clicking Start, and then clicking All Programs. On a fax server, you can use Windows Fax and Scan to send faxes, add accounts, and to monitor the incoming fax queue, the inbox, and the outbox. Users who are using computers running Windows Vista Business, Windows Vista Enterprise, Windows Vista Ultimate, and certain versions of Windows 7 can use this feature to send faxes and configure fax receipts. NoteUsers who are using computers running versions of Windows XP and Windows Server 2003 can send a fax using Fax Console. For more information about how to use Fax Console and manage fax servers in earlier versions of Windows, see http://go.microsoft.com/fwlink/?LinkId=90750. For more information about using Windows Fax and Scan to send and receive faxes, see Windows Fax and Scan on the Windows Help and How-to site (http://go.microsoft.com/fwlink/?LinkId=90751). For more information about using this feature to view fax activity, see Managing Incoming Faxes and Managing Outgoing Faxes.Hardware and software considerationsThe Fax Server role is available in all editions of Windows Server 2008 and Windows Server 2008 R2, except for Windows Web Server 2008 R2 and Windows Server 2008 R2 for Itanium-Based Systems. However, the Fax Service Manager snap-in is not available for the Server Core installation option of Windows Server 2008 R2. When you upgrade a fax server from Windows Server 2003 to Windows Server 2008 or Windows Server 2008 R2, the Fax Server role will be automatically installed as part of the upgrade. However, only certain settings will be maintained during the upgrade. For example, you must reconfigure fax sharing. In addition, any settings on the Security tab in the Properties dialog box of Fax Service Manager will revert to the default settings. Also, fax user accounts will not be created-you must create them manually. For more information, see the Fax Service Manager Help (at Run, type: HH faxcons.chm).Fax Server RoleUpdated: January 21, 2008By using a fax server, you can manage shared fax resources. This topic discusses what you can do with a fax server, the required and optional features of a fax server, and hardware and software used for running fax servers. It also explains how to install the Fax Server role and how to open Fax Service Manager to work with fax servers.What does the Fax Server role do?You can use a fax server to configure fax devices to enable the users in your network to send and receive faxes. On a computer running the Windows Server® 2008 operating system, you must install the Fax Server role, which is available from Server Manager, to create a fax server and install the Fax service and Fax Service Manager. Once you have created a fax server, you can use the server to do the following:Configure fax devicesManage usersSet up routing policies for incoming faxesSet up rules for outbound faxes to specific device groupsSet up archiving of faxes that have been previously sent or receivedConfigure logging to track the use of fax resourcesFax users can then send, receive, and manage faxes by using a network fax device that is managed by the fax server.Who will be interested in this role?IT professionals who are interested in providing fax functionality for their organizations using Windows Server 2008 should set up a fax server. What functionality does this role provide?Key fax-related features in Windows Server 2008 include: Fax Server role. The Fax Server role itself is new in Windows Server 2008. You must install the Fax Server role from Server Manager to create a fax server, install Fax Service Manager, and install the Fax service. Once you install the Fax Server role, you can access a role page in Server Manager that provides a single point from which you can view fax events, view status information for the Fax service, and access resources and additional information for fax servers. To access this page, in Server Manager, click Roles, and then click Fax Server. The role page appears in the right pane.Windows Fax and Scan. Users who are using computers running Windows Vista® Business, Windows Vista® Enterprise, Windows Vista® Ultimate, and Windows Server 2008 operating systems can send a fax using the new feature Windows Fax and Scan-either using a fax device attached locally or a fax server. To access this feature in Windows Server 2008, you must install Desktop Experience, which is available from Server Manager. On a fax server, you can use Windows Fax and Scan to send faxes and also to monitor the incoming fax queue, the inbox, and the outbox. NoteUsers who are using computers running versions of Windows XP and Windows Server 2003 can send a fax using Fax Console. For more information about how to use Fax Console and manage faxes in Windows XP, see http://go.microsoft.com/fwlink/?LinkId=90750. For more information about using Windows Fax and Scan to send and receive faxes, see Windows Fax and Scan on the Windows Help and How-to site (http://go.microsoft.com/fwlink/?LinkId=90751).Fax service. After you install the Fax Server role, the Fax service appears in the Services snap-in and you can start or stop the service directly from there or from the Fax Server role page in Server Manager.Fax Service Manager. Fax Service Manager is a Microsoft Management Console (MMC) snap-in that provides a central administration point for configuring and managing your fax resources. Once you install the Fax Server role, you can access Fax Service Manager from Server Manager by clicking Roles, clicking Fax Server, and then clicking Fax. You can also access this tool by adding it to an MMC console.Fax user accounts. Windows Server 2008 provides fax-related user accounts for more privacy and better management of faxes. Users can use accounts for accessing different types of fax services such as the local fax modem and a fax server. Your users must have an account to be able to access a fax server running Windows Server 2008. You can configure a fax server so that when a user uses Windows Fax and Scan for the first time to send a fax, an account is automatically created. If you use this setting, as soon as a user connects to the fax server, the account is automatically created. Or, if you want to have a tighter control on the users connecting to the fax server, you can disable this setting-in which case you must manually create the user accounts for all the users who need to access the fax server. If you have disabled the setting and a user tries to connect to the server without having an account already, the connection will be denied.Is this role available in all editions of Windows Server 2008?All of the fax-related components are available in all versions and editions of Windows Server 2008 and are compatible with the basic system requirements for this operating system.
What role must be installed with the Fax Server role on a WindowsvServer 2008 computer?
ou can use a fax server to configure fax devices to enable the users in your network to send and receive faxes. To create a fax server and install Fax Service Manager, the fax printer, and the Fax service, you must install the Fax Server role on a computer running on a computer running Windows Server 2008 or Windows Server 2008 R2. The Fax Server role is available from Server Manager.Once you have created a fax server, you can use Fax Service Manager to do the following:Configure fax devices.Manage users.Set up routing policies for incoming faxes.Set up rules for outbound faxes to specific device groups.Set up archiving of faxes that have been previously sent or received.Configure logging to track the use of fax resources.Configure delivery receipts.Stop or start the Fax service and block the Fax service from accepting any outbound or inbound faxes.Fax users can then send, receive, and manage their faxes by using a fax device managed by the fax server.Fax componentsKey fax-related components include:Fax Server role. To create a fax server, you must install the Fax Server role from Server Manager. This installs Fax Service Manager, Windows Fax and Scan, the Fax printer, and the Fax service. For instructions, see Install the Fax Server Role. Once you install the Fax Server role, you can access a role page in Server Manager that provides a single point from which you can view fax events, view status information for the Fax service, and access resources and additional information for fax servers. To access this page, in Server Manager, click Roles, and then click Fax Server. The role page appears in the right pane.Fax service. After you install the Fax Server role, the Fax service appears in the Services snap-in and you can start or stop the service directly from there or from the Fax Server role page in Server Manager.Fax Service Manager. Fax Service Manager, a Microsoft Management Console (MMC) snap-in, provides a central administration point for configuring and managing your fax resources. Once you install the Fax Server role, you can access Fax Service Manager from Server Manager by clicking Roles, clicking Fax Server, and then clicking Fax. You can also access this tool by adding it to an MMC console.Windows Fax and Scan. After you install the Fax Server role, you can access Windows Fax and Scan by clicking Start, and then clicking All Programs. On a fax server, you can use Windows Fax and Scan to send faxes, add accounts, and to monitor the incoming fax queue, the inbox, and the outbox. Users who are using computers running Windows Vista Business, Windows Vista Enterprise, Windows Vista Ultimate, and certain versions of Windows 7 can use this feature to send faxes and configure fax receipts. NoteUsers who are using computers running versions of Windows XP and Windows Server 2003 can send a fax using Fax Console. For more information about how to use Fax Console and manage fax servers in earlier versions of Windows, see http://go.microsoft.com/fwlink/?LinkId=90750.For more information about using Windows Fax and Scan to send and receive faxes, see Windows Fax and Scan on the Windows Help and How-to site (http://go.microsoft.com/fwlink/?LinkId=90751). For more information about using this feature to view fax activity, see Managing Incoming Faxes and Managing Outgoing Faxes.Hardware and software considerationsThe Fax Server role is available in all editions of Windows Server 2008 and Windows Server 2008 R2, except for Windows Web Server 2008 R2 and Windows Server 2008 R2 for Itanium-Based Systems. However, the Fax Service Manager snap-in is not available for the Server Core installation option of Windows Server 2008 R2. When you upgrade a fax server from Windows Server 2003 to Windows Server 2008 or Windows Server 2008 R2, the Fax Server role will be automatically installed as part of the upgrade. However, only certain settings will be maintained during the upgrade. For example, you must reconfigure fax sharing. In addition, any settings on the Security tab in the Properties dialog box of Fax Service Manager will revert to the default settings. Also, fax user accounts will not be created-you must create them manually. For more information, see the Fax Service Manager Help (at Run, type: HH faxcons.chm).Fax Server RoleUpdated: January 21, 2008By using a fax server, you can manage shared fax resources. This topic discusses what you can do with a fax server, the required and optional features of a fax server, and hardware and software used for running fax servers. It also explains how to install the Fax Server role and how to open Fax Service Manager to work with fax servers.What does the Fax Server role do?You can use a fax server to configure fax devices to enable the users in your network to send and receive faxes. On a computer running the Windows Server® 2008 operating system, you must install the Fax Server role, which is available from Server Manager, to create a fax server and install the Fax service and Fax Service Manager.Once you have created a fax server, you can use the server to do the following:Configure fax devicesManage usersSet up routing policies for incoming faxesSet up rules for outbound faxes to specific device groupsSet up archiving of faxes that have been previously sent or receivedConfigure logging to track the use of fax resourcesFax users can then send, receive, and manage faxes by using a network fax device that is managed by the fax server.Who will be interested in this role?IT professionals who are interested in providing fax functionality for their organizations using Windows Server 2008 should set up a fax server.What functionality does this role provide?Key fax-related features in Windows Server 2008 include:Fax Server role. The Fax Server role itself is new in Windows Server 2008. You must install the Fax Server role from Server Manager to create a fax server, install Fax Service Manager, and install the Fax service. Once you install the Fax Server role, you can access a role page in Server Manager that provides a single point from which you can view fax events, view status information for the Fax service, and access resources and additional information for fax servers. To access this page, in Server Manager, click Roles, and then click Fax Server. The role page appears in the right pane.Windows Fax and Scan. Users who are using computers running Windows Vista® Business, Windows Vista® Enterprise, Windows Vista® Ultimate, and Windows Server 2008 operating systems can send a fax using the new feature Windows Fax and Scan-either using a fax device attached locally or a fax server. To access this feature in Windows Server 2008, you must install Desktop Experience, which is available from Server Manager. On a fax server, you can use Windows Fax and Scan to send faxes and also to monitor the incoming fax queue, the inbox, and the outbox. NoteUsers who are using computers running versions of Windows XP and Windows Server 2003 can send a fax using Fax Console. For more information about how to use Fax Console and manage faxes in Windows XP, see http://go.microsoft.com/fwlink/?LinkId=90750.For more information about using Windows Fax and Scan to send and receive faxes, see Windows Fax and Scan on the Windows Help and How-to site (http://go.microsoft.com/fwlink/?LinkId=90751).Fax service. After you install the Fax Server role, the Fax service appears in the Services snap-in and you can start or stop the service directly from there or from the Fax Server role page in Server Manager.Fax Service Manager. Fax Service Manager is a Microsoft Management Console (MMC) snap-in that provides a central administration point for configuring and managing your fax resources. Once you install the Fax Server role, you can access Fax Service Manager from Server Manager by clicking Roles, clicking Fax Server, and then clicking Fax. You can also access this tool by adding it to an MMC console.Fax user accounts. Windows Server 2008 provides fax-related user accounts for more privacy and better management of faxes. Users can use accounts for accessing different types of fax services such as the local fax modem and a fax server. Your users must have an account to be able to access a fax server running Windows Server 2008. You can configure a fax server so that when a user uses Windows Fax and Scan for the first time to send a fax, an account is automatically created. If you use this setting, as soon as a user connects to the fax server, the account is automatically created. Or, if you want to have a tighter control on the users connecting to the fax server, you can disable this setting-in which case you must manually create the user accounts for all the users who need to access the fax server. If you have disabled the setting and a user tries to connect to the server without having an account already, the connection will be denied.Is this role available in all editions of Windows Server 2008?All of the fax-related components are available in all versions and editions of Windows Server 2008 and are compatible with the basic system requirements for this operating system.
Where can one find fax server appliances for sale?
Fax server appliances can be found for sale on Multi Tech, Amazon, Fax Back, Ebay, Fax Core, Fax Solutions, Silent Fax, XMediusFax, and Fax Solutions.
How can you set up a fax server?
You can set up a fax server by calling your local internet provider, or by following the instructions that came with your fax machine. Also, there are online services that are available for setting up a fax server.
How do you operate a fax server?
Operating a fax server is a fairly simple process. Instead of having the hassle of having a whole fax machine you can send and receive fax's from your email.
Would an external fax modem or an internal fax modem or a hand held fax scanner or a stand alone fax machine be installed by the manufacture?
yes. of course ---------------- Joyfax Server Fax Server solution
How do you operate a server?
Operating a fax server is a fairly simple process. Instead of having the hassle of having a whole fax machine you can send and receive fax's from your email.
How is it that you get a fax server?
You can call your local phone company and ask them to assist you with this type of question. Remember, A fax server is a set of software running on a server computer in the event that you do not have a dedicated fax line so it's very helpful.
What specialized severs is not included with Windows server operating systems?
Fax server
What role must you install with the fax server role on server 2008?
print services
What are the benefits of fax server software?
Fax server software enables one to send and receive faxes directly from a computer, without involving a physical fax machine. This is convenient when no hard copy of the faxed information is necessary.
