0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is DHCP discover?
The Dynamic Host Configuration Protocol (DHCP) lease process consists of four processes. The processes are 1. Discover 2. Offer 3. Request 4. Acknowledgment In the Discover process the DHCP client initiates the process by trying to discover any DHCP servers in the network. This discover packet is a broadcast packet.
How does DHCP IPv6 work?
DHCP V6 works on SARR process where:- S=SOLICIT message using multicast A=Advertise message form sever side R=Request R=Reply because ipv6 does not support broadcast. VIMAL KUMAR SINGH
How would you describe the DHCP leasing process?
FROM MSDNDHCP Lease ProcessA DHCP-enabled client obtains a lease for an IP address from a DHCP server. Before the lease expires, the DHCP server must renew the lease for the client or the client must obtain a new lease. Leases are retained in the DHCP server database approximately one day after expiration. This grace period protects a client's lease in case the client and server are in different time zones, their internal clocks are not synchronized, or the client is off the network when the lease expires.The DHCP lease process is a process that occurs when a computer which is a DHCP client initially boots up on the network, to provide an IP address and any additional TCP/IP configuration parameters to these clients.The terminology and concepts used when discussing DHCP leasing or the DHCP lease process is summarized below:DHCP lease: This is the amount of time for which a DHCP client is allowed to make use of a specific IP addresses. The default setting for the DHCP lease is 8 days.DHCP lease process: The process which occurs when the client initially boots up on the network. The DHCP lease process enables DHCP clients to automatically obtain IP addresses from a DHCP server.DHCP Discovery Broadcast message: This is a message sent over the network by a client computer that wants to obtain an IP address from a DHCP server.DHCP Offer message: This is message sent by DHCP servers that serves as a reply to a Discovery Broadcast message.DHCP Request Broadcast message: This message indicates that the client accepted an IP address offer from the first DHCP server which responded to it. The client broadcasts this particular message so that all the other DHCP servers that offered addresses to the client can withdraw their IP addresses.DHCP Acknowledge message: This message is sent by the DHCP server to the DHCP client, and is the process whereby which the IP address lease is assigned to the client.Unlimited lease duration: If you do not want the IP address assigned for a particular client to expire, you assign an unlimited lease duration.DHCP scopes: A scope can be defined as a set of IP addresses which the DHCP server can allocate or assign to DHCP clients. A scope contains specific configuration information for clients that have IP addresses which are within a particular scope. Scope information for each DHCP server is specific to that particular DHCP server only, and is not shared between DHCP servers. During the DHCP lease process, the DHCP scopes configured for a DHCP server is used to provide a DHCP client with an IP address.You can configure different lease duration settings for each DHCP scope.The lease duration rules which should be implemented when you determine the lease duration time for the scope of each of your subnets are:Use a shorter lease duration time if you have numerous mobile users, and if you are working in an environment that constantly has configuration changes.Use a longer lease duration time if the following statements are true:There are no mobile computersThe environment does not continually experience configuration changesIncrease the default setting of 8 days if the number of IP addresses for each subnet is by far greater than the number of DHCP devices within your environment.Use a shorter lease duration period if you have a limited number of IP addresses for each subnet, and you are near to meeting limit.Understanding the DHCP Lease ProcessThe DHCP lease process is a four-step process that occurs when a DHCP client initially boots up on the network. The DHCP process remains unchanged since its initial introduction with Windows NT 4.0. During the DHCP lease process, negotiation for an IP address occurs between a DHCP server and a client that needs to obtain an IP address. In a TCP/IP based network, to uniquely identify computers on the network, each computer must have a unique IP address. To communicate on the Internet and private TCP/IP network, all hosts defined on the network must have IP addresses. The 32-bit IP address identifies a particular host on the network. With DHCP, the system assigns IP addresses to clients, which in turn leads to less incorrect configurations of IP addresses. This is mainly due to IP configuration information being entered at one location, and the server distributing this information to clients. Duplicated IP addresses are also prevented.The DHCP lease process that occurs between the DHCP server and client is a simple process. The negotiation process for an IP address consists of four messages sent between the DHCP server and the DHCP client.Two messages from the clientTwo messages from the DHCP serverWhen the server assigns IP addresses to DHCP clients, it starts allocating addresses commencing from the bottom of its scope range, and starts moving to the top of its scope range.All unused addresses have to be used before the DHCP server:Allocates a previously used IP addresses to a new DHCP client. The DHCP server first assigns IP addresses that have not been used for the longest amount of time prior to assigning other previously used IP addresses.Allocates an expired IP addresses to a new DHCP clientDuring the four-step DHCP lease process, the events that occur are defined by the types of DHCP messages which are exchanged between the DHCP server and DHCP client:DHCPDISCOVER message: This message is used to request an IP address lease from a DHCP server. The message is sent when the client boots up on the network. The message is sent as a broadcast packet over the network, requesting for a DHCP server to respond to itDHCPOFFER message: This message is a response to a DHCPDISCOVER message, and is sent by one or numerous DHCP servers.DHCPREQUEST message: The client sends the initial DHCP server which responded to its request a DHCP Request message. The message basically indicates that the client is requesting the particular IP address for lease. The other DHCP servers who offered addresses withdraw those addresses at this point.DHCPACK message: The DHCP Acknowledge message is sent by the DHCP server to the DHCP client and is the process whereby which the DHCP server assigns the IP address lease to the DHCP client.The four steps involved in the DHCP lease process is often called DORA:DiscoverOfferRequestAcknowledge
How many packets are involved in a successful DHCP renewal process?
2
Dhcp background process for assigning ip address to client?
two
Describe the process of installing a DHCP server in an?
WIndows and non-Windows systems install DHCP in different ways, but the basic idea is the same group of steps:Add the DHCP service role to the systemActivate the serviceAdd the scope of IP addresses and exclusions to the DHCP serviceActivate the scopeOff you go - addresses!
What is the DCHP process called?
DHCP stands for Dynamic Host Configuration Protocol
Which DHCP message type is sent first in the process of obtaining an address lease?
DHCPREQUEST
What computer initiates the process of assigning an ip address through dhcp?
The client
What ports are used by dhcp and the DHCP client?
The port 67 and port 68 are used by DHCP and the DHCP clients.
Does the dhcp server have to be activated to issue leases to dhcp clients?
dhcp has to be authorized
What is the use of a DHCP relay agent?
The use of a DHCP relay agent is an agent that relays DHCP between DHCP clients and DHCP servers on different IP networks. The DHCP relay agent is compliant with RFC 1542.
