SSID stands for Service Set Identifiers. SSID is a type of wireless network internet connection. These wireless Web access points can produce signals up to 120 ft. This means users in neighborhoods and buildings will see several networks. The availablity of SSID's are in various types. The most basic is an ASCII set of characters that is only for that wireless router. The typical identifier is the MAC (Media Access Control) address of the router. SSID's are most usually designated at the setup configuration of the wireless access point. Many WAPs possess functions which can be used during the installation. Users can name the access points as they see fit. To make usage even more easier, a unique name is assigned.
The SSID acts essentially like the name of a wireless LAN network. It is how 2 routers for different networks in the same area differentiate what is for them. Specifically, every packet of information sent over the wireless network gets a 32 character ID tag. Each router works with packets with the correct tag. The SSID provides no wireless security itself, as the ID's can be read from each packet by nearby wireless devices.
SSID stands for Service Set IDentifier. it is the name of the wireless network you are connecting to.
SSID stands for service set identifier. It's usually called a network name. A SSID has a maximum length of 32 bytes. It's possible to inhibit the broadcasting of your SSID.
SSID stands for Service Set Identifier. It is a unique name that identifies a specific Wi-Fi network. When connecting to a Wi-Fi network, users are typically required to enter the SSID to establish a connection.
SSID is the name of any WIFI distributer. SSID name of the Network
What do you mean "Get around" SSID's? You need the SSID to ID what you want to connect to. The SSID is used to ID the Access point of the network. You "select" the SSID of the network you want to connect to. There is no reason to "get around" the SSID. It IS what you need to use to connect to the network. What do you mean "Get around" SSID's? You need the SSID to ID what you want to connect to. The SSID is used to ID the Access point of the network. You "select" the SSID of the network you want to connect to. There is no reason to "get around" the SSID. It IS what you need to use to connect to the network.
It's short for service set identifier
The ssid is the network name. So if your network name is 'linksys' so is your ssid.
the ssid code.everybody knows that.
An SSID is any name you want to give to your wireless network router (to identify it) up to 32 characters long. Frequestly the SSID has a default that is supplied by the router manufacturer. it is important ,not to broadcast ur ssid ,also change ur ssid name.
An SSID is the 'name' of a wireless network, it doesn't have to be a number.
find gateway ssid number
To connect to a WiFi network the SSID must be known so a FAKE SSID will prevent connection to the network.