OK. Allready solved the problem. As spdif cable is an optical, so laser goest thru that, it's really impossible to connect it with just some jack...
It's not straightforward to convert between SPDIF and a stereo pair of RCA plugs. SPDIF is a digital standard (SPDIF is an acronym for Sony Philips Digital Interface) and a pair of RCA plugs is analogue. It is possible to buy adaptors that convert from one to the other; if you search for SPDIF to analogue (or analog) convertor with google, you'll find a selection.
SPDIF can carry stereo (2 channels) of audio.
No, a S/PDIF is, by definition, a Sony / Phillips Digital Interconnect Format connector, and is always a digital signal. It is usually connected by an RCA cable, and can be carried by cable specified for analog use, but digital cable is better.
SPDIF is a type of digital audio connection. If you hook that up to a port on the AV receiver make sure it is marked "digital/coax", PCM etc....the connection will be orange in color, just like the output on the cable box. Now make sure your AV receiver is told what type of audio to look for on that particular input and make sure your cable box is told what type of audio to put out, not always necessary but would be in the set-up menu if needed.
Television. The entire thing is Turner Network Television
S/PDIF or Sony Philips Digital Interconnect Format is a standard/protocol that specifies transmission of audio signals from one device to another in digital format. Both coaxial electrical cable and an optical fiber cable can be used to carry signals in S/PDIF format. - Neeraj Sharma
Bronx
negative
SPDIF is a digital audio interface and is designed to transfer audio from one device to another without converting the signal to analog. Eventually, the signal will become analog as the speakers require an analog signal. to work. Almost all audio devices that have a SPDIF output also have an analog output so rather than buying a SPDIF to analog converter, use an existing analog output. If the device with the digital output doesn't have an analog output, then you don't have much choice about buying a converter unit. The converter is an active device so don't expect to find a simple converter cable. They don't cost a lot and they can be obtained from many specialist electronics stores. Good starting points are Radio Shack in the US or Maplin in the UK
Mator is voiced by "comedian" Larry the Cable Guy.
You would have to purchase a Digital to Analog converter and connect the SPDIF (orange RCA connector) to the D/A converter's digital input via a RCA/SPDIF cable. Then you would have to connect some type of headphone amplifier to the line outputs of the D/A converter.