You need to be more specific with the question. The operating system say windows uses
a generic driver for the hard drive, so if the computer did not see the hard drive you would not see anything, because the system would not run and you would only have DOS.
how do connect two hard driver
I'm not sure exactly what the question is. If it loads Windows, obviously the hard disk WAS detected. Still, it may be a faulty motherboard or a failing hard disk or a corrupted installation of Windows or something. You may want to get it checked out by calling tech support.
your hard disk cable maybe no tight, check out the IDE/SATA cable, also the power cable, go to the BIOS check if your hard disk is detected. If it is detected you can now format your computer.
You may need to update your driver or assign the drive a letter under disk management. I would try those two things if the USB is detected but not showing up in My Computer.
For almost all modern computers and hard drives, the only settings you should set is for the parameters of the disk to be detected automatically.
hard disk and driver corruption and also installation of OS is not proper.
Computer operating system should still have problems, lack of driver files, you repair the hard drive to do what it may be hard disk has bad sectors.Try a driver fixing tool is not a bad way.
A computer hard disk or hard drive (fixed disk) is hardware.
Hard Disk Drive.
IDE hard disk, SCSI hard disk, SATA hard disk, External hard disk, it is also differ by RPM speed for the HADD. I hope that helpes.
yes anything you do can and will be traced. so watch out
There are two types of Hard disk. 1:Sea gate disk 2:SATA Hard disk