You can use a marker to label your DVD-R (or DVD+R). Simply make sure you are obviously not marking on the side of the disc that you are burning on. If it's a double-sided DVD, then you're obviously not going to mark on either side.
Also make sure you do not use a sharp tip marker which may damage or scratch the surface of the DVD. A standard Sharpie marker should do the trick.
Wiki User
∙ 12y agoWiki User
∙ 11y agoYes, as long as you write on the side containing no data.
Write carefully with a non-bleeding marker. Don't use a pen/pencil because this is likely to damage the disc. Don't use a paint-like marker either because that may cause your drive to malfunction (raised markings, up above the disc's surface).
Once you write anything on DVD you can view, but you cannot re-write on the same dvd. So, it is DVD-R not DVD-RW
Yes, you need to insert a bland DVD disc, either DVD-r or DVD+r is ok, before you burn movie to DVD. Generally speaking, DVD-r is more compatible than DVD+r.
Yes, you can..
All brands have the same speeds, so just make sure you pick the fastest speed and you will be ok.
A DVD-R is a DVD disc that allows you to put your own information onto it. The -R in DVD-R means "recordable." Unlike a DVD you get from the video store, DVD-Rs are blank to begin with. Once you write data to them, they cannot be erased. The most common DVD-R is a write once 4.7GB "general purpose" disc, which is roughly equal to 120-minutes of standard playing lime.
You are unable too, DVD+R = Write once. DVD+RW= up to 1000 times rewriting. Hope that helps.
The write speed of Memorex DVD+R Dual Layer blank dvds is 8X.
DVD+R is a format for optical data storage. It is similar to, but incompatible with, the older DVD-R standard. A DVD+R is a write-once optical disc with 4.7 gigabytes (GB) of storage, generally used for non-volatile data storage or video applications.
Because DVD-R is already formatted. If you try to format it you will damage it permanently. You should write data on a DVD-r disk without formatting it.
The DVD drive in a MacBook Pro can burn Audio CD, Data CD, and DVD disks. It will not burn Blu-Ray disks. Types of writes: CD-Write: -R, -RW DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Newer DVD drives can read and write both DVD-R and DVD+R discs. An older one may or may not be able to. so you should double-check the drive. Usually a drive will display what is supports on the front of its tray.
a DVD plus r means ,dvd+r, it is a variant of common dvd, which can be written once . after it has been written, the data ot content can not be changed. if you want to change it, u need a dvd+rw, that means, u can write more than once