The most important things to remember in venting a dryer properly is that the vent hose is incredibly moist and also full of lint. Keeping this in mind,connect the vent properly to the outside by making sure there is an interior flex connection, an exterior cap, and ducts between the inside and the outside.
A clothes dryer vent should not be very humid. If it is, it may be clogged. Clean the dryer vent once a year to prevent this among other problems such as loss of efficiency and of course FIRE.
A good brand of clothes dryer link brush is Fuller Brush Dryer Vent Brush. One can purchase it from Amazon for $9.97 which is sold by and shipped by BedBathHome.
You should let the clothes dryer vent, a few hours a day because if you dont you can get it damaged and it will cost a fortune to buy a new one or cost you money to get it fixed if you dont sort it right.
I don't know about Illinois but check the Fuel Gas Code. I have never heard of PVC being allowed for a Clothes Dryer Vent.
When warm, moist air from the clothes dryer exhaust vent meets the colder air outside, it can cause condensation to occur. This condensation forms water vapor, which can appear as clouds or steam coming out of the vent.
Clear the vent tube
The purpose of a clothes dryer lint brush is help clean lint out of the dryer system. Lint gets stuck inside a dryer and the dryer hose and becomes a fire hazard. The lint brush pulls the lint out of hard to reach places in the dryer.
Clothes dryer vents should be cleaned at least once a year, and more often if there are signs of blockage.Some signs of blockage are:Clothing takes longer to dryIncreased humidity in the laundry roomwhen the dryer is running, there is not enough air flow to the air vent outsidethere is visible dust clogging the outside vent.Lint blockages in dryer vents are a significant home fire risk.
My dryer's vent is blocked and I need to clean it out to repair it. What is a good way to clean it out?
At least twice a year for good routine maintenance. Telltale symptoms of a clogged vent will be longer drying times required for your clothes or your clothes are coming out of the dryer still damp, when before they came out completely dry for the same amount of time used.
First, be sure to unplug your dryer, extend your dryer out, not too far though..just the length of your vent, unscrew your vent from the back of the dryer, then slowly slide the vent off. It's recommended at this point that you get some kind of vacuum cleaner, and insert it into the dryer hole. Afterwards, use your vacuum inside the vent tube, reattach the vent tube to the vent, push the dryer back to its position, and go about your day.
Yes! Venting your dryer to the attic is a bad idea. The dryer vent carries all the wet, humid air from the clothes dryer, along with the fine lint and dust particles that made it past the dryer's lint filter.If the dryer vents to the attic, the attic will get coated over time with the lint, and the increased humidity from the wet air venting into the enclosed space makes ripe conditions for some serious mold growth.If there is no external wall near the dryer where you can vent it directly to the outdoors, extend the dryer vent through the attic to an external attic vent, so that it can vent to the outdoors.