To program a Uniden DC355N scanner to hear police activities, first, ensure the scanner is set to the correct frequency range for your local police departments. Use the manual to find the specific frequencies or codes used by your local law enforcement. Enter these frequencies into the scanner by switching to the programming mode, and then input the desired channels. Finally, save your settings and switch to the scanning mode to listen for police communications.
go to marksscanner
easy to program
The Uniden 800 radar detector should be able to pick up a police signal from 2 miles away, but there is never a guarantee. It also depends on the type of radar used by the police.
You need to connect to a Comm port on a computer and use software found on the internet. It is fairly simple once you find a puter with the com port. I am not aware if a usb can be converted/used.
You need to connect to a Comm port on a computer and use software found on the internet. It is fairly simple once you find a puter with the com port. I am not aware if a usb can be converted/used.
Scanner codes
Here's a link to the owner's manual. I believe the answer begins on pg 40. http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/EXAI378om.pdf
a program is called a program. a set of instructions is called a manual.
The population of Uniden is 2,009.
To program your BC60XLT-1 Uniden Bearcat scanner in Washington State, first, locate the frequencies for local police, fire, and emergency services, which can often be found on websites like RadioReference. Turn on the scanner and press the "MAN" button to enter manual mode, then use the keypad to enter the desired frequency. You can also program channels by accessing the "PRG" mode, selecting an empty channel, and entering the frequency. Finally, ensure that you save your settings and scan for the programmed channels.
Uniden was created on 1966-02-07.
Uniden's motto is 'A World without wires'.