0
A straight through cable goes as follows on both ends:
- orange-white
- orange
- green-white
- Blue
- Blue-white
- Green
- Brown-white
- brown
A cross over switches green and orange so it would be as follows on the other end:
- green-white
- green
- orange-white
- Blue
- Blue-white
- Orange
- Brown-white
- brown
Add your answer:
Earn +20 pts
Difference between Straight cable and Cross Cable?
what is different between cross cabling and straight cabling ANSWER: a crossover cable is used to connect like devices, like a router to a router, but a straight through cable is used to connect dissimilar devices, like a router to a computer.
Which straight or cross cable is used for the configuration of router?
neither, you need a rollover cable
What standard is used in cross cable and straight cable?
EIA 568A/B standards apply.
Compare the advantages and disadvantages of cross cable and straight cable connection?
1. straigth cable are more effective than the crossover cable....
What type of cable should be used to connect switch to hub?
You need to use a straight type of connection. 568A or 568B depending which type your network is using.
How can one identify a cross-over cable?
Match up the two ends of the cable. Look closely at the color coding of the pins at both RJ-45 connectors. If the same colors are used in the same pin positions then the cable is a straight-through cable. If they are reversed at both ends then it is a cross-over cable.Sometimes the cable will be marked that way on the outside covering of the cable. Look for the words "cross-over cable".
What cable is used to connect computer to a switch?
Straight through ethernet cable (CAT 5/5e/6)
How can you know the difference of a cross-over cable from a straight through cable?
You can't tell from just looking at it. You will have to use a special tool or a volt meter. Connect terminals of multimeter to the first pin on both sides in resistance mode. If you get reasonable reading then you have straight through otherwise it is cross-over.
What cable will use for connecting switch to switch?
Most switches and routers these days allow for a standard straight through cable to connect each other. (So any CAT 5e or 6 cable you find at Best Buy will be fine) Older devices (Such as a Cisco 2900xl switch) require a cross over cable to connect like devices such as a switch to switch. These cables can also be found at Best Buy and will be clearly labeled "Cross Over". There are two different standards of straight through cables if making your own. See the related link. To make a cross over cable, wire one end with the A standard and the other with the B standard.
Why crossover cable is used for peer to peer network connection?
we used cross over cable ,coz cross over cable has two ends one end for tranmitting data and one end for receiving data ,thats why cross over used in peer to peer data connection.
What is the diffirence between Cross cable and state cable?
The difference between a cross cable and a state cable is that a cross cable, or crossover cable, is used specifically to connect two of the same devices.
Differentiante between cross cabling and straight cabling?
Straight Cable is used to connect a device to a different type of devices Eg: PC to a Switch PC to a Hub Switch to a Router E.t.c. Cross Cable is used to connect a device to a similar type of devices Eg: PC to PC Switch to Switch E.t.c.
