It should have a special little bottom to reset. If you press and hold for 5-35 seconds depending on particular router it will reset all settings to manufacture ones. If you have manual for the router, it's a good time to read it.
If its your router then you should have it. If you dont, you are going to have to login into the router and reset the WEP settings. If you have lost your router password aswell you will just have to reset the router and start from scratch.
usually there is a small hole at the back of the router which you can press and hold, this will reset your router to factory settings.
The primary thing that happens when you reset your router is that it does back to default settings. This means that the network and wireless settings will need to be reconfigured.
You will have to reset your TP-link router to its default settings.
The wireless router is usually the cause of any malfunctions in wireless internet. I always have to unplug mine, and then plug it back in later. Reset it.
The router must have a special reset button, you have read manual because almost each brand has its own way to be reset.
If you haven't changed the password for your Linksys router, it is admin. If you have changed the password, then I see no other way to reset the router and configure the router from the beginning.
hold the reset switch in for 10 sec while powering on the device
This is a standard wireless router connection protocol. You would have to reset the router's default settings.
Each router has a reset button located somewhere on the router's body. You need to find it. Different routers use different procedures to reset. For most of them you need to press and hold reset bottom until certain light will start blinking to stop doing so.
I tried everything, then I reset my wireless router and modem and it worked. Try it.
You might choose option do not allow edit settings through wireless. If you have the password you have a choices to connect to the router directly using a lan cable and change your settings. If it didn't work just reset the router settings which is the worst scenario but you don't have much of choice. Each router has a reset button, read the manual to find out how to reset your router.