Memory to memory access is certainly possible in the 8086/8088 microprocessor. Look at the repeated string copy instructions.
The highest memory address in the 8086/8088 is FFFFFH.
The 8086/8088 is a 16 bit computer running on a 20 bit address bus. Processes use a segmented memory architecture to access one of four 64kb memory segments from a physical space of 1mb.
Its MRDC (memory read control) it is a maximum mode pin in 8086 microprocessor
Because the 8086 is a 16 bit processor. Memory is organized as 512 MW of memory, or 1024 MB of memory.
8086 does not have RAM or ROM inside it. However, it has internal registers for storing intermediate and final results.
The 8086/8088 has 20 address lines. It can access 220, or 1MB, or 1,048,576 bytes of memory.
The 8086/8088 has 20 address lines. It can access 220, or 1MB, or 1,048,576 bytes of memory.
The 8086 was only capable of addressing 1Mbyte of memory. It was divided into segments of 65536 bytes (64 KB) each meaning about 16 segments.
Yes, both operand 1 and operand 2 can be in memory in the 8086. An example is the string copy primative, which takes source and destination operands to be memory pointed to by DS and ES.
hhh
The 8088 brings in data in 8 bit chunks form the memory and must bring in two because internally it is 16 bit. The 8086 brings in the full 16 bits at one time. so it is the path to memory that differs.