Coaxial cable, STP cable, UTP cable
There are two types of cable used for television radio frequency signals: 300 ohm twin lead flat cable and 75 ohm coaxial cable. The twin lead is typically used with a rabbit ears antenna and coaxial is typically used with roof top antenna or cable TV setups.For television baseband video signals coaxial cables are usually used.However for digital television baseband video signals these are not adequate and special cables (e.g. HDMI, DVI, DisplayPort) are used. These cables are typically many twisted pairs in a common shield.answer is Coaxial cable
coaxial cable and twisted pair cable. coaxial cable is the most widely used type of transmission line.
RG-58 coaxial cable is used for thin Ethernet.
optical fiber ,twited pai,coaxial cable
Coaxial.
The three types of network media are: Twisted-pair copper cable, fiber-optic cable, and coaxial cable.
It depends on the type of LAN; the most common cable in a LAN is UTP cable. In older LAN types you could also use coaxial copper cable. For UTP cable that would be Cat 5, cat 5E or above for most LANs.
coaxial cable has a solid copper or copper-clad-steel centre conductor surrounded by a non-conductive dielectric insulating material. The dielectric is surrounded by foil shield/s and/or copper braid/s which form the outer conductor and also shield against electromagnetic interference (EMI). The outer conductor/shield is encased in a PVC jacket.
Coaxial cable is a type of cable that has a single inner-core wire. This wire is surrounded by a layer of insulation, a woven metal shield, and an outer jacket. Coaxial cables are commonly used for television, internet, and other data transmission applications.
Mainly in LAN we can use 4 types of cables: 1) STP - Shielded Twisted Pair 2) UTP- Unshielded Twisted Pair UTP have 2 types 1 is Straight Cable 2 is Cross Cable 3) Coaxial Cable 4) Fiber Optic Cable
A thin coaxial cable that is used as a connector is also called a thinnet. It is popular in linear bus networks.