A coaxial cable has great uses in television antenna connections. TV satellite connections also use coaxial cables to connect decoders to the TV set.
On a DSL Modem you will find an RJ45 (Resistor Jack) connector with the help of which you can connect to an ISP of your choice.
no
Modulator/Demodulator.
if your modem has wireless capblility then you don't need a router.
Modem is a what not a who. A computer modem is a device that uses an analog carrier signal to encode digital information. The modem is how you connect to dial up Internet.
A modem typically uses around 5-10 watts of electricity when in use.
A modem connects your computer to the Internet. A router takes the Internet signal and splits it up and distributes it to other computers on your network. There are two types of routers, wired and wireless. A wired modem router uses a cat5 cable to connect to the modem and to connect to each computer on the network. A wireless router uses wires to connect to the modem but connects to each computer on the network without wires.
There is a big difference between a cable modem and a DSL modem. There are many types of both available and these options can be viewed on Amazon. A cable modem uses a coxial cable input to connect it. However, a DSL modem uses a phone cord in order to function.
A Wi-Fi network uses a wireless router and a high-speed internet modem.
cable modem
cable modem - A technologythat uses cable TV lines for data transmission
False
ADSL filter is a passive electrical circuit, (low pass filter) which is used along with an ADSL modem (for internet access). It can be built into an ADSL modem or is provided as a small box along with the modem. On one side it connects to the telephone network side. Other side has two connections one for connecting the phone and other one to connect to the ADSL modem. It essentially filters the high frequencies, which the modem uses, and thus prevents it from interfering with the telephone signals which uses lower frequencies for audio signals.
The cable modem allows the cable provider to plug their service into the back of the modem(coaxial cable) versus the DSL modem allows the phone company to plug their service into the back of the modem(phone line). The DSL service typically requires you to have a separate phone number from your main land line.
WIN-911 uses a standard modem to deliver alpha or numeric pages. WIn-911 uses an always on network or internet connection to send Emails. This would require an Ethernet adapter wireless internet card. WIN-911 uses a Dialogic Telephony card or TAPI compliant modem to do voice notifications
A modem is the device that allows you to connect to the Internet. A router uses wires to connects from the modem to other computers to share the Internet connection. A wireless router uses wires to connect to the modem but connects to the other computers through a wireless connection. A modem with a built in wireless router only uses wires to connect it to the internet source meaning you can place it any where in the house that has access to an Internet source.