Behringer uses custom power supplies. Contact a local dealer to find a replacement unit.
Well it all depends on how high-end your computer is. If it is a rather basic model there are probably between 450 and 500 watts, but if you have a higher-end computer, it will probably have between 600 and 850 watts. This way the higher the ammount of watts your computer has the more power it will have to run the hardware of your computer.
To protect a computer completely from electrical problems you would have to keep it unplugged. Unfortunately this makes it useless. Using surge protection on the power supply is a simple and relatively cheap protection from spikes in the power supply. A UPS or uninteruptible power supply can be set up to allow the computer to run for a period of time after a breakdown in the power supply. These are more expensive the longer they can supply power, and are often set up to supply power for just long enough to do a save and tidy shutdown of the computer.
where can i find a Emerson DVD player at. model. ewd7001 trusurround.
how do i add multiple power factors together to find a the total power factor of a large site
That question refers to a power supply used by eMachines. This particular model had a nasty habit of going bad and taking out the motherboard with it. It's highly recommended that you NOT use this power supply if you are trying to repair such damage. Find another model.
The Maxim Company fiber optic snowman power supply model MOA 411210 can typically be found in specialty lighting stores, online retailers specializing in holiday decorations, or directly from the manufacturer's website. This power supply is designed to convert standard household electricity (120VAC, 60Hz) into a lower voltage and current output (12VAC, 1000mA) specifically for the fiber optic snowman decoration. It is essential to ensure compatibility with the specific model of the snowman to avoid damaging the decoration or the power supply.
To find the power supply look at a schematic for the fuel injection system in a service manual for the vehicle they are in.
Yes, you can replace a 250 watt power supply with a 500 watt one in a computer. The higher wattage will provide more power for additional components or upgrades. Just ensure that the physical dimensions and connectors in the new power supply match those of your current power supply.
Find out what the VA capacity of the power supply is and then add up the connected load in VA (volts x amps). If the load totals are greater that the VA power supply capacity then this is where the heat is coming from. The power supply is overloaded. Remove some of the load or get a bigger capacity power supply.
The quickest place to find a Dell Inspiron power supply may be on Amazon. You can also contact your local Dell supplier and ask them for their assistance.
Its usually written on a label on the outside of the power supply box. The number will specify Watts, i.e.150W for 150 Watts
You have other things to consider besides wattage. Find the entire list of requirements for power for your laptop, probably on the company website (you can look up the model number in their search option under support). Make sure your power supply matches all the specs or you will burn the motherboard up.
Voltage will be same in all branches. Voltage= Current * Total Resistance
The power supplied by a three-phase supply, or any supply come to that, is determined by the LOAD, and not by the supply. So you must look at the data provided on the equipment's nameplate to find out what its power rating is.
The company, Newegg, has an online site that provides a power supply calculator. Lifehacker is another online site that offers this type of calculator.
go to e-gun part