RJ45 is the standard 8P8C telecommunications connector commonly found in computer networks such as Ethernet. RJ45 specifies both the plug and the socket. Connections are typically formed using twisted pair cabling, predominantly Category 5 (CAT5).
Ethernet cables may be configured as patch cables or as crossover cables. These two configurations are standardised in TIA/EIA-568 and ISO/IEC 11801. Patch cables are used to connect two different devices, such as when connecting a computer to a network switch or hub. Patch cables use the T568B scheme to terminate both endpoints. T568B is also used to terminate socket-to-socket endpoints and adaptors. Crossover cables are used to connect devices of the same type, such as when connecting one computer directly to another, and use the T568A scheme on one end and T568B on the other.
On a DSL Modem you will find an RJ45 (Resistor Jack) connector with the help of which you can connect to an ISP of your choice.
The type of connector is used by the analog modems is RJ11 or RJ45.
RJ45 is a 8 pin connector used on networking(ethernet) cables RJ11 is 6 pin connector used on telephone cables in the USA
It is a registered jack.The telephone RJ45 specifies the physical male and female connectors as well as the pin assignments of the wires in a telephone cable.In simple words , it is a connector having 8 pins.
The Socket 478 connector is used for Intel Pentium 4 processors and their Celeron equivalents.
An ethernet cable. RJ45 is the style of the connector.
RJ45 is used with ethernet cables in computer networking while RJ11 is used in connecting telephone units.RJ45 contains more wires than RJ11and RJ45 is physically bigger than RJ11 to accommodate the extra wires
RJ45 female and males.
A male RJ45 plug is specifically designed to fit an RJ45 socket. You would need a device that takes both allows you to plug both coax and an RJ45 connector into it. Perhaps a cable modem? Kind regards, Gareth
the popular connector used in lan network is RJ45
The RJ45 connector is typically made of plastic. The pins inside the connector are usually made of metal, such as copper or gold, to ensure a reliable electrical connection.
A punch down block is used with an RJ45 connector by connecting the wires from the RJ45 cable to the corresponding terminals on the punch down block. This creates a secure and reliable connection for networking purposes.
RJ45 Telecommunications - a connector standard for telephone cables, RJ45 cables are also used as a connector for a computer network by way of connecting to the internet.
rj45
RJ45 is name of connector types used for Ethernet connections on computers and other Ethernet networking devices like routers and switches and also modems and other devices which support Ethernet interface. - Neeraj Sharma RJ45 is the standard for the plug that you use for connecting cat5 cable to a network. It's an 8 connector plug that looks like a larger version of a phone plug.
An RJ-45 connector is the the connector at the end of a Cat-# cable (also known as a lan cable/network cable).
It is called RJ45.