Ipconfig and Ping both are commands of command line interface (CLI) .IPconfig is used to display all network configuration values . Ping is used to check whether a host can send or receive packets.
Ipconfig shows IP address, Subnet Mask, and Default gateway for all adapters. Ipconfig /all shows the description of each network connection along with additional information such as your physical (MAC) address, DHCP connections, Lease times, as well as in-depth IPv6 information.
Ping is a useful TCP/IP utility to check network connectivity. Two other useful troubleshooting tools are Ipconfig (Windows 200/XP) and Winipcfg (Windows 9x/ME), which test TCP/IP configuration.
ipconfig /release
ping is the easiest.
ipconfig /renew if you're on windows
IPCONFIG and PING
First type Ipconfig /allThen type ping 127.0.0.1The IPconfig /all will show you all connections, and the ping will show you if your NIC is working and is usable.(network+ guides to networks answer)ifconfig -a
Ipconfig shows IP address, Subnet Mask, and Default gateway for all adapters. Ipconfig /all shows the description of each network connection along with additional information such as your physical (MAC) address, DHCP connections, Lease times, as well as in-depth IPv6 information.
Check your local system's firewall for blocking of ICMP (ping) traffic.
ping, ipconfig, traceroute.
Are there any firewalls on the network. A lot of people configure firewalls in weird ways, leading to some strange network behaviour. Could be that you have a firewall blocking all your outgoing icmp, thus explaining the lack of ping success, but success with ipconfig /renew.
IPConfig is an application in Microsoft. IPConfig displays all current network configuration values and can be used to modify a variety of network settings.
Ping is a useful TCP/IP utility to check network connectivity. Two other useful troubleshooting tools are Ipconfig (Windows 200/XP) and Winipcfg (Windows 9x/ME), which test TCP/IP configuration.
check the dns services on the client restart the services ipconfig /flushdns /registerdns it should resolve the issue
First, communicate somehow with the computer. For example, if you know the IP address, do a PING command.Then check the ARP cache. If you use Windows, type arp -a. This will show the translations between recently used IP addresses and their corresponding MAC addresses.Or just go to each computer and give the ipconfig /allcommand.First, communicate somehow with the computer. For example, if you know the IP address, do a PING command.Then check the ARP cache. If you use Windows, type arp -a. This will show the translations between recently used IP addresses and their corresponding MAC addresses.Or just go to each computer and give the ipconfig /allcommand.First, communicate somehow with the computer. For example, if you know the IP address, do a PING command.Then check the ARP cache. If you use Windows, type arp -a. This will show the translations between recently used IP addresses and their corresponding MAC addresses.Or just go to each computer and give the ipconfig /allcommand.First, communicate somehow with the computer. For example, if you know the IP address, do a PING command.Then check the ARP cache. If you use Windows, type arp -a. This will show the translations between recently used IP addresses and their corresponding MAC addresses.Or just go to each computer and give the ipconfig /allcommand.
ipconfig /all
ipconfig /release