0
Add your answer:
Earn +20 pts
What do extension and intentions of relations mean in dbms?
ExtensionThe extension of a given relation is the set of tuples appearing in that relation at any given instance. The extension thus varies with time. It changes as tuples are created, destroyed, and updated.
Entity integrity constraint?
The entity integrity constraint states that no primary key value can be null. This is because the primary key value is used to identify individual tuples in a relation. Having null value for the primary key implies that we cannot identify some tuples. This also specifies that there may not be any duplicate entries in primary key column key row.
What is Functional dependency and normalization for database?
A functional dependency occurs between two attributes in a database, A and B, if there exists a relationship such that for each value of A there is only one corresponding value of B (A -> B). This can be extended to a functional dependency where A may be a set of tuples (x, y, z) that correspond to a single value B ([x, y, z] -> B). In simple mathematical terms the functional dependency must pass the vertical line test for proper functions. Normalization of a relational database means that the relations (tables) in the database conform to a set of rules for a certain normal form (First - Sixth Normal Form [1-6NF] and/or Boyce-Codd Normal Form [BCNF]). The higher the normal form of a table the less vulnerable it is to data inconsistency and data anomalies formed during updates, inserts, and deletes. Normalization often reduces data redundancy in a database which reduces data inconsistency and anomaly risks. Normalizing a database requires analysis of the closure of the set of functional dependencies to ensure that the set complies with the rules for the given normal form. If the table does not comply with the rules then the table is split following specific procedures to achieve the desired normal form. Every table in a database has a normal form and to make a statement that a database is in a certain normal form (ex. 3NF) means that every table complies with the rules for 3NF.
Explain about primary key super key candidate key alternate key composite key foreign key?
KEYS IN SQL* Alternate key - An alternate key is any candidate key which is not selected to be the primary key* Candidate key - A candidate key is a field or combination of fields that can act as a primary key field for that table to uniquely identify each record in that table.For Eg:The table:Emloyee(Name,Address,Ssn,Employee_Idprimary_key,Phone_ext)In the above example Ssn no. and employee identity are ccandidate keys.* Compound key - compound key (also called a composite key or concatenated key) is a key that consists of 2 or more attributes.* Primary key - a primary key is a value that can be used to identify a unique row in a table. Attributes are associated with it. Examples of primary keys are Social Security numbers (associated to a specific person) or ISBNs (associated to a specific book).In the relational model of data, a primary key is a candidate key chosen as the main method of uniquely identifying a tuple in a relation.For Eg:Emloyee(Name,Address,Ssn,Employee_Idprimary_key,Phone_ext)* Superkey - A superkey is defined in the relational model as a set of attributes of a relation variable (relvar) for which it holds that in all relations assigned to that variable there are no two distinct tuples (rows) that have the same values for the attributes in this set. Equivalently a superkey can also be defined as a set of attributes of a relvar upon which all attributes of the relvar are functionally dependent.For Eg:Emloyee(Name,Address,Ssn,Employee_Idprimary_key,Phone_ext)All the above are super keys.* Foreign key - a foreign key (FK) is a field or group of fields in a database record that points to a key field or group of fields forming a key of another database record in some (usually different) table. Usually a foreign key in one table refers to the primary key (PK) of another table. This way references can be made to link information together and it is an essential part of database normalization.For Eg:For a Student....School(Name,Address,Phone,School_Reg_noprimary_key
What are Interrupts and their types?
In computing, an interrupt is an asynchronous signal indicating the need for attention or a synchronous event in software indicating the need for a change in execution.A hardware interrupt causes the processor to save its state of execution and begin execution of an interrupt handler. Software interrupts are usually implemented as instructions in the instruction set, which cause a context switch to an interrupt handler similar to a hardware interrupt.Interrupts are a commonly used technique for computer multitasking, especially in real-time computing. Such a system is said to be interrupt-driven.An act of interrupting is referred to as an interrupt request (IRQ).Types of Interrupts1. Level-triggeredA level-triggered interrupt is an interrupt for which an unserviced interrupt is indicated by a particular state, high level or low level, of the interrupt request line. A device wishing to signal an interrupt drives the line to its active level, and then holds it at that level until serviced. It ceases asserting the line when the CPU commands it to or otherwise handles the condition that caused it to signal the interrupt.2. Edge-triggeredAn edge-triggered interrupt is an interrupt signalled by a level transition on the interrupt line, either a falling edge (high to low) or a rising edge (low to high). A device wishing to signal an interrupt drives a pulse onto the line and then releases the line to its inactive state. If the pulse is too short to be detected by polled I/O then special hardware may be required to detect the edge.Edge-triggered interrupts do not suffer the problems that level-triggered interrupts have with sharing. Service of a low-priority device can be postponed arbitrarily, and interrupts will continue to be received from the high-priority devices that are being serviced. If there is a device that the CPU does not know how to service, it may cause a spurious interrupt, or even periodic spurious interrupts, but it does not interfere with the interrupt signalling of the other devices. However, it is fairly easy for an edge triggered interrupt to be missed - for example if interrupts have to be masked for a period - and unless there is some type of hardware latch that records the event it is impossible to recover. Such problems caused many "lockups" in early computer hardware because the processor did not know it was expected to do something. More modern hardware often has one or more interrupt status registers that latch the interrupt requests; well written edge-driven interrupt software often checks such registers to ensure events are not missed.3. HybridSome systems use a hybrid of level-triggered and edge-triggered signalling. The hardware not only looks for an edge, but it also verifies that the interrupt signal stays active for a certain period of time. A common use of a hybrid interrupt is for the NMI (non-maskable interrupt) input. Because NMIs generally signal major -- or even catastrophic -- system events, a good implementation of this signal tries to ensure that the interrupt is valid by verifying that it remains active for a period of time. This 2-step approach helps to eliminate false interrupts from affecting the system.4. Message-signaledMain article: Message Signaled InterruptsA message-signalled interrupt does not use a physical interrupt line. Instead, a device signals its request for service by sending a short message over some communications medium, typically a computer bus. The message might be of a type reserved for interrupts, or it might be of some pre-existing type such as a memory write.Message-signalled interrupts behave very much like edge-triggered interrupts, in that the interrupt is a momentary signal rather than a continuous condition. Interrupt-handling software treats the two in much the same manner. Typically, multiple pending message-signalled interrupts with the same message (the same virtual interrupt line) are allowed to merge, just as closely spaced edge-triggered interrupts can merge.5. DoorbellIn a push button analogy applied to computer systems, the term doorbell or doorbell interrupt is often used to describe a mechanism whereby a software system can signal or notify a computer hardware device that there is some work to be done. Typically, the software system will place data in some well known and mutually agreed upon memory location(s), and "ring the doorbell" by writing to a different memory location. This different memory location is often called the doorbell region, and there may even be multiple doorbells serving different purposes in this region. It's this act of writing to the doorbell region of memory that "rings the bell" and notifies the hardware device that the data is ready and waiting. The hardware device would now know that the data is valid and can be acted upon. It would typically write the data to a hard disk drive, or send it over a network, or encrypt it, etc
What a sentence using the word spurious?
i was spurious when my sister was wearing my dress
What is a metaphor for spurious?
Dogs are spurious slimes because they can't feel.
Why duplicate tuples are not allowed in DBMS?
Since relation is a set, and tuples are element of a set, according to set theory, the elements of a set are not ordered.
How do you use spurious in a sentence?
Some of the arguments in favor of shutting the factory are questionable and others downright spurious. The painting comes from spurious origins.
Tuple in dbms?
rows are called tuples
Sentences with the word spurious?
They made spurious claims for damages to the insurance company.
What are spurious classical languages?
There are no spurious classical languages. To be spurious would mean they were fake. The classical languages include French, Spanish, Italian, Latin, and Greek.
Spurious in a sentence?
The FBI cursed the spurious lead that incorrectly led them to an empty hideout.
What is a full outer join sql?
Join is used to combine related tuples from two relations . Full outer join cover all possible combinations of common tuples.
Why do duplicate tuples not allowed in a reaction?
Duplicate tuples are not allowed in a reaction because each reactant and product must be listed only once to accurately represent the stoichiometry of the reaction. Including duplicate tuples would result in an incorrect representation of the reactants and products involved, leading to inaccuracies in the reaction equation.
Why are tuples in a relation not ordered?
A relation is defined as a set of tuples. Mathematically, elements of a set have no order among them; hence, tuples in a relation do not have any particular order. In other words, a relation is not sensitive to the ordering of tuples. Tuple ordering is not part of a relation definition because a relation attempts to represent facts at a logical or abstract level. Many logical orders can be specified on a relation but there is no preference for one logical ordering over another.
Why the tuples in a relation are not ordered?
A relation is defined as a set of tuples. Mathematically, elements of a set have no order among them; hence, tuples in a relation do not have any particular order. In other words, a relation is not sensitive to the ordering of tuples. Tuple ordering is not part of a relation definition because a relation attempts to represent facts at a logical or abstract level. Many logical orders can be specified on a relation but there is no preference for one logical ordering over another.
