Attenuation distortion is the distortion of an analog signal that occurs during transmission when the transmission medium does not have a flat frequency response across the bandwidth of the medium.
The baud rate measures the number of times the transmission medium can change its state in one second, which is the number of discrete signals in a given second. Baud rate is the speed of transmission when using modems over telephone lines.
twisted pair
Following factors can affect performance of a network1 Disturbance in communication media2 mismatch in Protocols3 Power failure4 Server failure5 Congestion in networks6 Repetitive demand of same data packets7 Virus or spy-ware or Mal -ware attacksNumber of simultaneous users Type of transmission medium
In many cases, the cost of the transmission medium is large compared to the cost of a single transmitter/receiver pair or a modulator/demodulator pair. If there is spare bandwidth, then the incremental cost of the transmission can be negligible. The new station pair is simply added to an unused sub channel. If there is no unused sub channel it may be possible to re divide the existing sub channels creating more sub channels with less bandwidth. If, on the other hand a new pair causes a complete new line to be added then the incremental cost if large indeed.
Cost(how much is it going to cost?) Time (how physically fast is the medium?) Reliability and Compatibility
Transmission of a wave refers to its ability to pass through a medium or across a boundary. The characteristics of the medium can affect the transmission of the wave, such as its density, temperature, and composition. The wave may change speed, direction, or amplitude depending on these factors.
I only know ONE factor that affects the speed of light. Its the medium.
full-duplex
full-duplex
Full-duplex or duplex
answ2. Treating a material (wall, glass, air) as a transmission line, much of the incident sound will be reflected at the interface between medium one and medium two. And a similar transmission loss when the sound is re-radiated from medium two into medium one again.The characteristics of the transmission medium (air, concrete, glass ..) are considered as those of spring and mass. If these are very different between the two materials (media) then there will be little transmission of sound.So a concrete wall will be a good sound insulator, whereas a fibrous material would not be.the vibrations that cause sound can't travel through the material
the substance that energy is transfered through. For example when you hear a sound the transmission medium is air.
broadband - A transmissiontechnique that carries more than one type of transmission on the same medium,
Sound waves require a medium, such as air, water, or solids, for transmission. Light, radio, and infrared waves can travel through a vacuum and do not require a medium for transmission.
No Guy its not.
Coyotes are considered as medium to large sized animals.