network printer
A Campus Area Network (CAN) is used to connect buidlings across campuses of colleges or Universities. CANs' also connect buildings across a military installation as well. A CAN is actually a type of Local Area Network (LAN). It is larger than a LAN but smaller than a Metropolitan Area Network (MAN). A Home Area Network is the network used in an individual home. Home users may have all of their computers in the house connected toghether by CAT-V (twisted pair) cable or by a wireless network (actually called a WLAN - Wireless Local Area Network).
A peer-to-peer (P2P) network is a type of computer network in which each computer, or node, in the network acts as both a client and a server, allowing for decentralized sharing of resources and information. P2P networks can use a variety of peripheral devices to connect and share data between nodes. One common peripheral device used in P2P networks is the network interface card (NIC), which allows computers to connect to a network and communicate with other devices. The NIC is responsible for transmitting and receiving data over the network, and can be either wired or wireless. Wired NICs use an Ethernet cable to connect to a router or switch, while wireless NICs use Wi-Fi technology to connect to a wireless network. Another peripheral device commonly used in P2P networks is the external hard drive. External hard drives allow users to store and share large amounts of data, such as documents, photos, and videos, between nodes in the network. External hard drives can be connected to a computer through a USB or FireWire port, and can be accessed by other computers in the network through file sharing software or a network-attached storage (NAS) device. The use of external hard drives in P2P networks allows for easy sharing and backup of important data, without the need for expensive and complex server systems.
PAT
1) To connect a workplace of users 2) To network a group of machines, such as MRI's, CT's etc.
to connect end users using cable technology
You need a WAP - WIreless Access Point. This is a bridge device that connects the two types of networks together. Or, use a router.
Intel PROSet Wireless Software is used for management of network profiles. Users can create profiles, connect them to networks, and edit their specifications.
One type of restriction is to use MAC filtering in the WAP. Another would be to secure the wireless network via WEP/WPA/WPA2 security which would require other users to have the key to connect.
The simple wireless configuration technique that can make the network invisible to unauthorized users are disable SSID broadcasting. This will disable the network from being broadcasted.
Microsoft Connect
Well routers are devices for connection to the internet wireless. That means that the router receives connection, and users can either choose to connect a wire to the router or just receive internet connection from the router wireless.
Hotspots are areas with access to a wireless network, often created using a router or mobile device that broadcasts a Wi-Fi signal for users to connect to. Users can then access the internet through this connection, typically with a password or paid subscription. Hotspots are commonly found in public places like cafes, airports, and hotels.
It means its waiting for wireless connections to join your area.
A router. One possible solution to the problem of the overloaded network is to add a second networking device, such as a larger integrated service router (ISR). When adding a device, it is a good practice to place the wired and wireless users on separate local subnetworks to increase security. The original wireless router can still be used to provide the wireless users with connectivity and security on one network. Hubs or switches connecting the wired users can then be directly connected to the new ISR using a different network. The ISR and the wireless router can then be directly connected with a third network. This new network configuration requires that the existing Class C network be divided into at least three subnetworks. Using classful subnetting, at least two bits must be taken from the host portion of the address to meet the customer requirements. This subnetting scheme results in the creation of four individual networks, each with 62 available host addresses (64 possible addresses, minus the all-0s and all-1s addresses).
Skype
For either a personal or a business wireless network, it's to protect it from unauthorized users.